diff --git a/data.json b/data.json
index 5a9e212..61adc33 100644
--- a/data.json
+++ b/data.json
@@ -2,8 +2,8 @@
"title": "CCNA 2 Finals",
"questions": [
{
- "id": "gTe7oTd",
- "title": "1. Refer to the exhibit. Assuming that the routing tables are up to date and no ARP messages are needed,\n after a packet leaves H1, how many times is the L2 header rewritten in the path to H2?",
+ "id": "vQbpa_5",
+ "title": "1. Refer to the exhibit. Assuming that the routing tables are up to date and no ARP messages are needed,\n after a packet leaves H1, how many times is the L2 header rewritten in the path to H2?
",
"images": [
"https://itexamanswers.net/wp-content/uploads/2017/03/2017-03-09_112526.jpg"
],
@@ -19,8 +19,8 @@
"correct": "q1-1"
},
{
- "id": "hTRaWWYw",
- "title": "2. Refer to the exhibit. Which highlighted value represents a specific destination network in the routing\n table?",
+ "id": "yBCgPv-C",
+ "title": "2. Refer to the exhibit. Which highlighted value represents a specific destination network in the routing\n table?
",
"images": [
"https://itexamanswers.net/wp-content/uploads/2017/02/newqccna2finalexam.png"
],
@@ -35,7 +35,7 @@
"correct": "q2-1"
},
{
- "id": "qZa5HXuT",
+ "id": "K2B6kUVS",
"title": "3. Which type of static route is configured with a greater administrative distance to provide a backup route\n to a route learned from a dynamic routing protocol?",
"images": [],
"type": 0,
@@ -48,8 +48,8 @@
"correct": "q3-0"
},
{
- "id": "BRlth3UG",
- "title": "4. Refer to the exhibit. Which route was configured as a static route to a specific network using the\n next-hop address?",
+ "id": "GyAovvOA",
+ "title": "4. Refer to the exhibit. Which route was configured as a static route to a specific network using the\n next-hop address?
",
"images": [
"https://itexamanswers.net/wp-content/uploads/2016/02/sdsdsfdsf.jpg"
],
@@ -63,7 +63,7 @@
"correct": "q4-0"
},
{
- "id": "RrIurvp0",
+ "id": "olhyaMgy",
"title": "5. What network prefix and prefix-length combination is used to create a default static route that will match\n any IPv6 destination?",
"images": [],
"type": 0,
@@ -76,7 +76,7 @@
"correct": "q5-3"
},
{
- "id": "4FVxI8Ja",
+ "id": "nAdWLl7I",
"title": "6. A router has used the OSPF protocol to learn a route to the 172.16.32.0/19 network. Which command will\n implement a backup floating static route to this network?",
"images": [],
"type": 0,
@@ -89,7 +89,7 @@
"correct": "q6-1"
},
{
- "id": "cmAO48Qd",
+ "id": "V8qFVhkK",
"title": "7. Refer to the exhibit. Currently router R1 uses an EIGRP route learned from Branch2 to reach the\n 10.10.0.0/16 network. Which floating static route would create a backup route to the 10.10.0.0/16 network in the\n event that the link between R1 and Branch2 goes down?",
"images": [
"https://itexamanswers.net/wp-content/uploads/2017/03/2017-03-09_113020.jpg"
@@ -104,7 +104,7 @@
"correct": "q7-2"
},
{
- "id": "Kj3zXAci",
+ "id": "wSDALkHu",
"title": "8. Which statement describes a route that has been learned dynamically?",
"images": [],
"type": 0,
@@ -117,7 +117,7 @@
"correct": "q8-0"
},
{
- "id": "Ck-lXXMT",
+ "id": "42oq0-P_",
"title": "9. Compared with dynamic routes, what are two advantages of using static routes on a router? (Choose\n two.)",
"images": [],
"type": 1,
@@ -134,7 +134,7 @@
]
},
{
- "id": "1K3BNaYk",
+ "id": "VZVRh4Gi",
"title": "10. To enable RIPv1 routing for a specific subnet, the configuration command network 172.16.64.32 was entered\n by the network administrator. What address, if any, appears in the running configuration file to identify this\n network?",
"images": [],
"type": 0,
@@ -147,7 +147,7 @@
"correct": "q10-2"
},
{
- "id": "kU4-Kq6p",
+ "id": "8SPGanay",
"title": "11. A network administrator adds the default-information originate command to the configuration of a router\n that uses RIP as the routing protocol. What will result from adding this command?",
"images": [],
"type": 0,
@@ -160,8 +160,8 @@
"correct": "q11-1"
},
{
- "id": "hiAut9Dv",
- "title": "12. Refer to the exhibit. What is the administrative distance value that indicates the route for R2 to reach\n the 10.10.0.0/16 network?",
+ "id": "81gwIeab",
+ "title": "12. Refer to the exhibit. What is the administrative distance value that indicates the route for R2 to reach\n the 10.10.0.0/16 network?
",
"images": [
"https://itexamanswers.net/wp-content/uploads/2016/02/2017-06-04_082949.png"
],
@@ -175,7 +175,7 @@
"correct": "q12-0"
},
{
- "id": "Ybppob92",
+ "id": "nAnb-11P",
"title": "13. Which route will a router use to forward an IPv4 packet after examining its routing table for the best\n match with the destination address?",
"images": [],
"type": 0,
@@ -188,8 +188,8 @@
"correct": "q13-2"
},
{
- "id": "IWUOMLFV",
- "title": "14. Refer to the exhibit. An administrator is attempting to install an IPv6 static route on router R1 to\n reach the network attached to router R2. After the static route command is entered, connectivity to the network is\n still failing. What error has been made in the static route configuration?",
+ "id": "IG2mVuDC",
+ "title": "14. Refer to the exhibit. An administrator is attempting to install an IPv6 static route on router R1 to\n reach the network attached to router R2. After the static route command is entered, connectivity to the network is\n still failing. What error has been made in the static route configuration?
",
"images": [
"https://itexamanswers.net/wp-content/uploads/2016/02/7-2.jpg"
],
@@ -203,7 +203,7 @@
"correct": "q14-2"
},
{
- "id": "1lIqUm6q",
+ "id": "L2Bk5bHq",
"title": "15. A network administrator reviews the routing table on the router and sees a route to the destination\n network 172.16.64.0/18 with a next-hop IP address of 192.168.1.1. What are two descriptions of this route? (Choose\n two.)",
"images": [],
"type": 1,
@@ -220,7 +220,7 @@
]
},
{
- "id": "cZXPSqAk",
+ "id": "7V0Tft30",
"title": "16. Which two factors are important when deciding which interior gateway routing protocol to use? (Choose\n two.)",
"images": [],
"type": 1,
@@ -237,7 +237,7 @@
]
},
{
- "id": "dHD5Q2C1c",
+ "id": "7fkQ8nR3y",
"title": "17. Employees of a company connect their wireless laptop computers to the enterprise LAN via wireless access\n points that are cabled to the Ethernet ports of switches. At which layer of the three-layer hierarchical network\n design model do these switches operate?",
"images": [],
"type": 0,
@@ -251,7 +251,7 @@
"correct": "q17-1"
},
{
- "id": "jXe3SNVwX",
+ "id": "rmDn9Ln48",
"title": "18. What is a basic function of the Cisco Borderless Architecture access layer?",
"images": [],
"type": 0,
@@ -264,7 +264,7 @@
"correct": "q18-2"
},
{
- "id": "V4mTasAZJ",
+ "id": "Vf_YA2ucP",
"title": "19. What is a characteristic of the distribution layer in the three layer hierarchical model?",
"images": [],
"type": 0,
@@ -277,7 +277,7 @@
"correct": "q19-0"
},
{
- "id": "AvO_zjA6n",
+ "id": "yUR69GjKA",
"title": "20. Which information does a switch use to populate the MAC address table?",
"images": [],
"type": 0,
@@ -292,7 +292,7 @@
"correct": "q20-4"
},
{
- "id": "PnMppSjhP",
+ "id": "zb19gbDo-",
"title": "21. Which statement is correct about Ethernet switch frame forwarding decisions?",
"images": [],
"type": 0,
@@ -305,7 +305,7 @@
"correct": "q21-1"
},
{
- "id": "a5WVYv5X1",
+ "id": "Octd_LCbu",
"title": "22. What is the name of the layer in the Cisco borderless switched network design that would have more\n switches deployed than other layers in the network design of a large organization?",
"images": [],
"type": 0,
@@ -319,7 +319,7 @@
"correct": "q22-0"
},
{
- "id": "HSy7ls0g3",
+ "id": "egfdSEWb6",
"title": "23. Which switching method drops frames that fail the FCS check?",
"images": [],
"type": 0,
@@ -332,7 +332,7 @@
"correct": "q23-3"
},
{
- "id": "0t0REHDuu",
+ "id": "HKi-ch9vq",
"title": "24. In what situation would a Layer 2 switch have an IP address configured?",
"images": [],
"type": 0,
@@ -345,8 +345,8 @@
"correct": "q24-1"
},
{
- "id": "_groqTYgV",
- "title": "25. Refer to the exhibit. A network engineer is examining a configuration implemented by a new intern who\n attached an IP phone to a switch port and configured the switch. Identify the issue, if any, with the\n configuration.",
+ "id": "owwokqbHZ",
+ "title": "25. Refer to the exhibit. A network engineer is examining a configuration implemented by a new intern who\n attached an IP phone to a switch port and configured the switch. Identify the issue, if any, with the\n configuration.
",
"images": [
"https://itexamanswers.net/wp-content/uploads/2016/02/i297774v1n1_297774.png"
],
@@ -361,7 +361,7 @@
"correct": "q25-1"
},
{
- "id": "Jzd7ZIsm2",
+ "id": "kbmBGLj-L",
"title": "26. A network administrator is configuring a new Cisco switch for remote management access. Which three items\n must be configured on the switch for the task? (Choose three.)",
"images": [],
"type": 1,
@@ -380,7 +380,7 @@
]
},
{
- "id": "TFukYH_Do",
+ "id": "-SMbSZq1E",
"title": "27. A network technician has been asked to secure all switches in the campus network. The security\n requirements are for each switch to automatically learn and add MAC addresses to both the address table and the\n running configuration. Which port security configuration will meet these requirements?",
"images": [],
"type": 0,
@@ -393,7 +393,7 @@
"correct": "q27-3"
},
{
- "id": "1NSQOdPqV",
+ "id": "6sgf6N0LF",
"title": "28. A network administrator is configuring port security on a Cisco switch. When a violation occurs, which\n violation mode that is configured on an interface will cause packets with an unknown source address to be dropped\n with no notification sent?",
"images": [],
"type": 0,
@@ -406,7 +406,7 @@
"correct": "q28-2"
},
{
- "id": "CGU_emAzn",
+ "id": "ufcA706A6",
"title": "29. Two employees in the Sales department work different shifts with their laptop computers and share the\n same Ethernet port in the office. Which set of commands would allow only these two laptops to use the Ethernet\n port and create violation log entry without shutting down the port if a violation occurs?",
"images": [],
"type": 0,
@@ -419,8 +419,8 @@
"correct": "q29-1"
},
{
- "id": "O48QaWoip",
- "title": "30. Refer to the exhibit. What protocol should be configured on SW-A Port 0/1 if it is to send traffic from\n multiple VLANs to switch SW-B?",
+ "id": "BmW4nQSi4",
+ "title": "30. Refer to the exhibit. What protocol should be configured on SW-A Port 0/1 if it is to send traffic from\n multiple VLANs to switch SW-B?
\n",
"images": [
"https://itexamanswers.net/wp-content/uploads/2016/02/2017-03-09_114611.png"
],
@@ -435,7 +435,7 @@
"correct": "q30-1"
},
{
- "id": "KSAHOfk-s",
+ "id": "QNXTxAZLV",
"title": "31. A Cisco Catalyst switch has been added to support the use of multiple VLANs as part of an enterprise\n network. The network technician finds it necessary to clear all VLAN information from the switch in order to\n incorporate a new network design. What should the technician do to accomplish this task?",
"images": [],
"type": 0,
@@ -448,7 +448,7 @@
"correct": "q31-2"
},
{
- "id": "nX5qtrsuQ",
+ "id": "y3FMUVvae",
"title": "32. What will a Cisco LAN switch do if it receives an incoming frame and the destination MAC address is not\n listed in the MAC address table?",
"images": [],
"type": 0,
@@ -461,7 +461,7 @@
"correct": "q32-3"
},
{
- "id": "iI3B0UsrJ",
+ "id": "32dj0FK9a",
"title": "33. What VLANs are allowed across a trunk when the range of allowed VLANs is set to the default\n value?",
"images": [],
"type": 0,
@@ -474,7 +474,7 @@
"correct": "q33-3"
},
{
- "id": "4OWZQYVSE",
+ "id": "MLtiuK6Rx",
"title": "34. Refer to the exhibit. A network administrator is configuring inter-VLAN routing on a network. For now,\n only one VLAN is being used, but more will be added soon. What is the missing parameter that is shown as the\n highlighted question mark in the graphic?",
"images": [
"https://itexamanswers.net/wp-content/uploads/2016/02/2017-03-09_113658.png"
@@ -490,7 +490,7 @@
"correct": "q34-1"
},
{
- "id": "lKzMfxTof",
+ "id": "30db7-WDB",
"title": "35. A network administrator is designing an ACL. The networks 192.168.1.0/25, 192.168.0.0/25,\n 192.168.0.128/25, 192.168.1.128/26, and 192.168.1.192/26 are affected by the ACL. Which wildcard mask, if any, is\n the most efficient to use when specifying all of these networks in a single ACL permit entry?",
"images": [],
"type": 0,
@@ -504,7 +504,7 @@
"correct": "q35-2"
},
{
- "id": "aH9jrv6PL",
+ "id": "WBQ9ydE6b",
"title": "36. The computers used by the network administrators for a school are on the 10.7.0.0/27 network. Which two\n commands are needed at a minimum to apply an ACL that will ensure that only devices that are used by the network\n administrators will be allowed Telnet access to the routers? (Choose two.)",
"images": [],
"type": 1,
@@ -523,7 +523,7 @@
]
},
{
- "id": "6DriA9XGj",
+ "id": "9VrpqPa7p",
"title": "37. A network engineer has created a standard ACL to control SSH access to a router. Which command will apply\n the ACL to the VTY lines?",
"images": [],
"type": 0,
@@ -536,8 +536,8 @@
"correct": "q37-1"
},
{
- "id": "4DyZmze-j",
- "title": "38. What is the reason why the DHCPREQUEST message is sent as a broadcast during the DHCPv4 process?",
+ "id": "3JdecWlhz",
+ "title": "38. What is the reason why the DHCPREQUEST message is sent as a broadcast during the DHCPv4 process?
\n",
"images": [],
"type": 0,
"options": {
@@ -549,7 +549,7 @@
"correct": "q38-3"
},
{
- "id": "CYeRe4a6e",
+ "id": "fDg8Ya13Q",
"title": "39. Which set of commands will configure a router as a DHCP server that will assign IPv4 addresses to the\n 192.168.100.0/23 LAN while reserving the first 10 and the last addresses for static assignment?",
"images": [],
"type": 0,
@@ -562,7 +562,7 @@
"correct": "q39-2"
},
{
- "id": "Zpp7_Xdq0",
+ "id": "C01UG1rqr",
"title": "40. Which command, when issued in the interface configuration mode of a router, enables the interface to\n acquire an IPv4 address automatically from an ISP, when that link to the ISP is enabled?",
"images": [],
"type": 0,
@@ -575,8 +575,8 @@
"correct": "q40-1"
},
{
- "id": "BVpOjY2We",
- "title": "41. Refer to the exhibit. A network administrator is configuring a router as a DHCPv6 server. The\n administrator issues a show ipv6 dhcp pool command to verify the configuration. Which statement explains the\n reason that the number of active clients is 0?",
+ "id": "bNm2CQZsk",
+ "title": "41. Refer to the exhibit. A network administrator is configuring a router as a DHCPv6 server. The\n administrator issues a show ipv6 dhcp pool command to verify the configuration. Which statement explains the\n reason that the number of active clients is 0?
",
"images": [
"https://itexamanswers.net/wp-content/uploads/2016/02/i210895v1n1_210895.jpg"
],
@@ -590,7 +590,7 @@
"correct": "q41-3"
},
{
- "id": "u4fv_ClTD",
+ "id": "YrlE-R9c0",
"title": "42. Refer to the exhibit. R1 has been configured as shown. However, PC1 is not able to receive an IPv4\n address. What is the problem?",
"images": [
"https://itexamanswers.net/wp-content/uploads/2016/02/i215789v1n3_Item-215789.jpg"
@@ -605,7 +605,7 @@
"correct": "q42-3"
},
{
- "id": "fZBHnIy3k",
+ "id": "o1C63i2DJ",
"title": "43. Refer to the exhibit. Which statement shown in the output allows router R1 to respond to stateless DHCPv6\n requests?",
"images": [
"https://itexamanswers.net/wp-content/uploads/2016/02/2017-03-09_113944.png"
@@ -621,7 +621,7 @@
"correct": "q43-1"
},
{
- "id": "bwTV5d7ji",
+ "id": "qR_G2HRVe",
"title": "44. Refer to the exhibit. NAT is configured on Remote and Main. The PC is sending a request to the web\n server. What IPv4 address is the source IP address in the packet between Main and the web server?",
"images": [
"https://itexamanswers.net/wp-content/uploads/2016/02/2017-03-09_142246.png"
@@ -638,7 +638,7 @@
"correct": "q44-2"
},
{
- "id": "pBjSzgGqV",
+ "id": "y30GRDIb6",
"title": "45. Which type of traffic would most likely have problems when passing through a NAT device?",
"images": [],
"type": 0,
@@ -652,8 +652,8 @@
"correct": "q45-1"
},
{
- "id": "T-Zu54li_",
- "title": "46. Refer to the exhibit. Which two statements are correct based on the output as shown in the exhibit?\n (Choose two.) ",
+ "id": "X2llQEmfS",
+ "title": "46. Refer to the exhibit. Which two statements are correct based on the output as shown in the exhibit?\n (Choose two.)
\n",
"images": [
"https://itexamanswers.net/wp-content/uploads/2017/03/2017-03-09_113131.jpg"
],
@@ -671,7 +671,7 @@
]
},
{
- "id": "71cbwjWNL",
+ "id": "Q8WaVIg4e",
"title": "47. Refer to the exhibit. A network administrator has configured R2 for PAT. Why is the configuration\n incorrect?",
"images": [
"https://itexamanswers.net/wp-content/uploads/2016/02/2017-06-04_082118.png"
@@ -686,7 +686,7 @@
"correct": "q47-0"
},
{
- "id": "Ukwg2fuYa",
+ "id": "VFh8sMJgb",
"title": "48. A small company has a web server in the office that is accessible from the Internet. The IP address\n 192.168.10.15 is assigned to the web server. The network administrator is configuring the router so that external\n clients can access the web server over the Internet. Which item is required in the NAT configuration?",
"images": [],
"type": 0,
@@ -699,7 +699,7 @@
"correct": "q48-3"
},
{
- "id": "xp-veyAll",
+ "id": "30zHSVa7W",
"title": "49. A college marketing department has a networked storage device that uses the IP address 10.18.7.5, TCP\n port 443 for encryption, and UDP port 4365 for video streaming. The college already uses PAT on the router that\n connects to the Internet. The router interface has the public IP address of 209.165.200.225/30. The IP NAT pool\n currently uses the IP addresses ranging from 209.165.200.228.236. Which configuration would the network\n administrator add to allow this device to be accessed by the marketing personnel from home?",
"images": [],
"type": 0,
@@ -713,8 +713,8 @@
"correct": "q49-3"
},
{
- "id": "q-fbwU5HP",
- "title": "50. Refer to the exhibit. Based on the output that is shown, what type of NAT has been\n implemented?",
+ "id": "1DQKvzkpf",
+ "title": "50. Refer to the exhibit. Based on the output that is shown, what type of NAT has been\n implemented?
",
"images": [
"https://itexamanswers.net/wp-content/uploads/2016/02/2017-03-09_145554.png"
],
@@ -728,8 +728,8 @@
"correct": "q50-3"
},
{
- "id": "-JrLr2siq",
- "title": "51. Refer to the exhibit. An administrator is trying to configure PAT on R1, but PC-A is unable to access the\n Internet. The administrator tries to ping a server on the Internet from PC-A and collects the debugs that are\n shown in the exhibit. Based on this output, what is most likely the cause of the problem?",
+ "id": "sk_yiUPax",
+ "title": "51. Refer to the exhibit. An administrator is trying to configure PAT on R1, but PC-A is unable to access the\n Internet. The administrator tries to ping a server on the Internet from PC-A and collects the debugs that are\n shown in the exhibit. Based on this output, what is most likely the cause of the problem?
",
"images": [
"https://itexamanswers.net/wp-content/uploads/2016/02/2017-03-09_142831.png"
],
@@ -743,7 +743,7 @@
"correct": "q51-1"
},
{
- "id": "REOVzHDP3",
+ "id": "mUdeo_Oq6",
"title": "52. A network engineer is interested in obtaining specific information relevant to the operation of both\n distribution and access layer Cisco devices. Which command provides common information relevant to both types of\n devices?",
"images": [],
"type": 0,
@@ -757,7 +757,7 @@
"correct": "q52-4"
},
{
- "id": "Z1NlzQuiL",
+ "id": "QTSv0mgy1",
"title": "53. Which two statements are correct if a configured NTP master on a network cannot reach any clock with a\n lower stratum number? (Choose two.)",
"images": [],
"type": 1,
@@ -774,7 +774,7 @@
]
},
{
- "id": "TqXQ-CwtI",
+ "id": "OpS1LcD5j",
"title": "54. What are three functions provided by the syslog service? (Choose three.)",
"images": [],
"type": 1,
@@ -793,8 +793,8 @@
]
},
{
- "id": "HcJwha45e",
- "title": "55. Refer to the exhibit. Which three hosts will receive ARP requests from host A, assuming that port Fa0/4\n on both switches is configured to carry traffic for multiple VLANs? (Choose three.)",
+ "id": "4i-ZZQrQL",
+ "title": "55. Refer to the exhibit. Which three hosts will receive ARP requests from host A, assuming that port Fa0/4\n on both switches is configured to carry traffic for multiple VLANs? (Choose three.)
",
"images": [
"https://itexamanswers.net/wp-content/uploads/2017/06/46.jpg"
],
@@ -814,8 +814,8 @@
]
},
{
- "id": "__PDDV0rI",
- "title": "56. Refer to the exhibit. An administrator is examining the message in a syslog server. What can be\n determined from the message?",
+ "id": "oeQhDtC8V",
+ "title": "56. Refer to the exhibit. An administrator is examining the message in a syslog server. What can be\n determined from the message?
",
"images": [
"https://itexamanswers.net/wp-content/uploads/2016/02/2017-03-09_144047.png"
],
@@ -829,7 +829,7 @@
"correct": "q56-3"
},
{
- "id": "3LYnE810T",
+ "id": "vhgEakmlG",
"title": "57. When a customer purchases a Cisco IOS 15.0 software package, what serves as the receipt for that customer\n and is used to obtain the license as well?",
"images": [],
"type": 0,
@@ -842,8 +842,8 @@
"correct": "q57-3"
},
{
- "id": "zyEwt6w7B",
- "title": "58. Refer to the exhibit. The network administrator enters these commands into the R1 router:",
+ "id": "AGchEyPSU",
+ "title": "58. Refer to the exhibit. The network administrator enters these commands into the R1 router:
\n
R1# copy running-config tftp Address or name of\n remote host [ ] When the router prompts for an address or remote host name, what IP address should the\n administrator enter at the prompt?",
"images": [
"https://itexamanswers.net/wp-content/uploads/2016/02/2017-03-09_141819.png"
],
@@ -858,7 +858,7 @@
"correct": "q58-1"
},
{
- "id": "yfjJb03xj",
+ "id": "1Cyinhv16",
"title": "59. Which configuration would be appropriate for a small business that has the public IP address of\n 209.165.200.225/30 assigned to the external interface on the router that connects to the Internet?",
"images": [],
"type": 0,
@@ -871,8 +871,8 @@
"correct": "q59-0"
},
{
- "id": "mW4Q-5fQW",
- "title": "63. Refer to the exhibit. Host A has sent a packet to host B. What will be the source MAC and IP addresses on\n the packet when it arrives at host B?",
+ "id": "aSIeqwqKT",
+ "title": "63. Refer to the exhibit. Host A has sent a packet to host B. What will be the source MAC and IP addresses on\n the packet when it arrives at host B?
",
"images": [
"https://itexamanswers.net/wp-content/uploads/2016/02/p39-prac-final-ccna2.jpg"
],
@@ -887,7 +887,7 @@
"correct": "q63-2"
},
{
- "id": "4b3KDUHuO",
+ "id": "yoJg1w3iq",
"title": "64. What benefit does NAT64 provide?",
"images": [],
"type": 0,
@@ -900,7 +900,7 @@
"correct": "q64-2"
},
{
- "id": "fPLENldwd",
+ "id": "BwSowKleV",
"title": "65. What is the effect of configuring the ipv6 unicast-routing command on a router?",
"images": [],
"type": 0,
@@ -913,7 +913,7 @@
"correct": "q65-1"
},
{
- "id": "vlzj1PdxC",
+ "id": "zYW0_2K0h",
"title": "66. What is a characteristic of a static route that creates a gateway of last resort?",
"images": [],
"type": 0,
@@ -926,7 +926,7 @@
"correct": "q66-2"
},
{
- "id": "Xjhz8kZCu",
+ "id": "OcOd8Snkt",
"title": "67. Refer to the exhibit. Which route was configured as a static route to a specific network using the\n next-hop address?",
"images": [],
"type": 0,
@@ -939,8 +939,8 @@
"correct": "q67-2"
},
{
- "id": "SpxWRhVgP",
- "title": "68. Refer to the exhibit. Which command will properly configure an IPv6 static route on R2 that will allow\n traffic from PC2 to reach PC1 without any recursive lookups by router R2?",
+ "id": "BxyC2qpku",
+ "title": "68. Refer to the exhibit. Which command will properly configure an IPv6 static route on R2 that will allow\n traffic from PC2 to reach PC1 without any recursive lookups by router R2?
",
"images": [
"https://itexamanswers.net/wp-content/uploads/2016/02/5-1.jpg"
],
@@ -954,7 +954,7 @@
"correct": "q68-1"
},
{
- "id": "c7_Q5ikYT",
+ "id": "BLsTpuMPl",
"title": "69. Which network design may be recommended for a small campus site that consists of a single building with a\n few users?",
"images": [],
"type": 0,
@@ -967,7 +967,7 @@
"correct": "q69-2"
},
{
- "id": "k8FwtQ5FV",
+ "id": "d8wzcjEy0",
"title": "70. Which information does a switch use to keep the MAC address table information current?",
"images": [],
"type": 0,
@@ -982,7 +982,7 @@
"correct": "q70-4"
},
{
- "id": "ohAtCgjTm",
+ "id": "UNtLgu6DD",
"title": "71. Which advantage does the store-and-forward switching method have compared with the cut-through switching\n method?",
"images": [],
"type": 0,
@@ -995,7 +995,7 @@
"correct": "q71-1"
},
{
- "id": "AK7uckDih",
+ "id": "Q564Aurmu",
"title": "72. Which characteristic describes cut-through switching?",
"images": [],
"type": 0,
@@ -1008,7 +1008,7 @@
"correct": "q72-0"
},
{
- "id": "MXOXTYnbO",
+ "id": "JNZbN0W-e",
"title": "73. What is a result of connecting two or more switches together?",
"images": [],
"type": 0,
@@ -1021,7 +1021,7 @@
"correct": "q73-1"
},
{
- "id": "3gkQ9cyR8",
+ "id": "JCW64sHrA",
"title": "74. Which commands are used to re-enable a port that has been disabled as a result of a port security\n violation?",
"images": [],
"type": 0,
@@ -1034,7 +1034,7 @@
"correct": "q74-0"
},
{
- "id": "If-wrXcac",
+ "id": "7rwLH4JGE",
"title": "75. Which two characteristics describe the native VLAN? (Choose two.)",
"images": [],
"type": 1,
@@ -1051,7 +1051,7 @@
]
},
{
- "id": "o4xh11oFs",
+ "id": "g9kfKE3_e",
"title": "76. Which type of traffic is designed for a native VLAN?",
"images": [],
"type": 0,
@@ -1064,7 +1064,7 @@
"correct": "q76-3"
},
{
- "id": "K0XR06oEZ",
+ "id": "oAImZ5uRL",
"title": "77. An administrator is trying to remove configurations from a switch. After using the command erase\n startup-config and reloading the switch, the administrator finds that VLANs 10 and 100 still exist on the switch.\n Why were these VLANs not removed?",
"images": [],
"type": 0,
@@ -1077,8 +1077,8 @@
"correct": "q77-3"
},
{
- "id": "coYHCTcdY",
- "title": "78. Refer to the exhibit. Inter-VLAN communication between VLAN 10, VLAN 20, and VLAN 30 is not successful.\n What is the problem?",
+ "id": "-0J_3HHzO",
+ "title": "78. Refer to the exhibit. Inter-VLAN communication between VLAN 10, VLAN 20, and VLAN 30 is not successful.\n What is the problem?
",
"images": [
"https://itexamanswers.net/wp-content/uploads/2017/06/28.jpg"
],
@@ -1092,7 +1092,7 @@
"correct": "q78-1"
},
{
- "id": "gXPxZM2Nv",
+ "id": "AhqUYkC7X",
"title": "79. A network administrator is configuring an ACL with the command access-list 10 permit 172.16.32.0\n 0.0.15.255. Which IPv4 address matches the ACE?",
"images": [],
"type": 1,
@@ -1109,7 +1109,7 @@
]
},
{
- "id": "HCPAKLdiZ",
+ "id": "E50NoT3fq",
"title": "80. Refer to the exhibit. A PC at address 10.1.1.45 is unable to access the Internet. What is the most likely\n cause of the problem?",
"images": [
"https://itexamanswers.net/wp-content/uploads/2017/06/41.jpg"
@@ -1124,7 +1124,7 @@
"correct": "q80-0"
},
{
- "id": "61AQq0Q2I",
+ "id": "iPqbq2Fse",
"title": "81. A network administrator is verifying a configuration that involves network monitoring. What is the\n purpose of the global configuration command logging trap 4?",
"images": [],
"type": 0,
@@ -1137,7 +1137,7 @@
"correct": "q81-2"
},
{
- "id": "3yUhmvM1R",
+ "id": "r2qOX6P2a",
"title": "82. What is indicated by the M in the Cisco IOS image name c1900-universalk9-mz.SPA.153-3.M.bin?",
"images": [],
"type": 0,
@@ -1150,8 +1150,8 @@
"correct": "q82-3"
},
{
- "id": "rSsWbYDq3",
- "title": "83. Refer to the exhibit. A network engineer is preparing to upgrade the IOS system image on a Cisco 2901\n router. Based on the output shown, how much space is available for the new image?",
+ "id": "_qBiTXiXG",
+ "title": "83. Refer to the exhibit. A network engineer is preparing to upgrade the IOS system image on a Cisco 2901\n router. Based on the output shown, how much space is available for the new image?
",
"images": [
"https://itexamanswers.net/wp-content/uploads/2017/06/47.jpg"
],
@@ -1165,8 +1165,8 @@
"correct": "q83-2"
},
{
- "id": "tMnho2MBc",
- "title": "84. Refer to the exhibit. Based on the exhibited configuration and output, what are two reasons VLAN 99\n missing? (Choose two.)",
+ "id": "_-Aikk5gm",
+ "title": "84. Refer to the exhibit. Based on the exhibited configuration and output, what are two reasons VLAN 99\n missing? (Choose two.)
",
"images": [
"https://itexamanswers.net/wp-content/uploads/2017/06/48.jpg"
],
@@ -1184,8 +1184,8 @@
]
},
{
- "id": "GRUifmawz",
- "title": "86. Refer to the exhibit. Assuming that the routing tables are up to date and no ARP messages are needed,\n after a packet leaves H1, how many times is the L2 header rewritten in the path to H3?",
+ "id": "i4BLDBv1H",
+ "title": "86. Refer to the exhibit. Assuming that the routing tables are up to date and no ARP messages are needed,\n after a packet leaves H1, how many times is the L2 header rewritten in the path to H3?
",
"images": [
"https://itexamanswers.net/wp-content/uploads/2017/06/1.jpg"
],
@@ -1201,8 +1201,8 @@
"correct": "q86-1"
},
{
- "id": "mE4g9QXPz",
- "title": "87. Refer to the exhibit. Which highlighted value represents a specific destination network in the routing\n table?",
+ "id": "E0ht3qHcb",
+ "title": "87. Refer to the exhibit. Which highlighted value represents a specific destination network in the routing\n table?
",
"images": [
"https://itexamanswers.net/wp-content/uploads/2016/02/2017-03-09_150031.png"
],
@@ -1217,7 +1217,7 @@
"correct": "q87-1"
},
{
- "id": "TIfsE1qmV",
+ "id": "UHgQzEF64",
"title": "88. On which two routers would a default static route be configured? (Choose two.)",
"images": [],
"type": 1,
@@ -1234,7 +1234,7 @@
]
},
{
- "id": "ZdzgOWhMk",
+ "id": "jEi2LDIru",
"title": "89. The exhibit shows two PCs called PC A and PC B, two routes called R1 and R2, and two switches. PC A has\n the address 172.16.1.1/24 and is connected to a switch and into an interface on R1 that has the IP address\n 172.16.1.254. PC B has the address 172.16.2.1/24 and is connected to a switch that is connected to another\n interface on R1 with the IP address 172.16.2.254. The serial interface on R1 has the address 172.16.3.1 and is\n connected to the serial interface on R2 that has the address 172.16.3.2/24. R2 is connected to the internet cloud.\n Which command will create a static route on R2 in order to reach PC B? ",
"images": [
"https://itexamanswers.net/wp-content/uploads/2016/02/i246203v1n1_2107451.jpg"
@@ -1249,8 +1249,8 @@
"correct": "q89-2"
},
{
- "id": "72hTc_tyh",
- "title": "90. Refer to the exhibit. R1 was configured with the static route command ip route 209.165.200.224\n 255.255.255.224 S0/0/0 and consequently users on network 172.16.0.0/16 are unable to reach resources on the\n Internet. How should this static route be changed to allow user traffic from the LAN to reach the\n Internet?",
+ "id": "5sbSmEQyR",
+ "title": "90. Refer to the exhibit. R1 was configured with the static route command ip route 209.165.200.224\n 255.255.255.224 S0/0/0 and consequently users on network 172.16.0.0/16 are unable to reach resources on the\n Internet. How should this static route be changed to allow user traffic from the LAN to reach the\n Internet?
",
"images": [
"https://itexamanswers.net/wp-content/uploads/2016/02/sfdsgfdg5-1.jpg"
],
@@ -1264,8 +1264,8 @@
"correct": "q90-1"
},
{
- "id": "9cIX8h1_b",
- "title": "91. Refer to the exhibit. Router R1 has an OSPF neighbor relationship with the ISP router over the\n 192.168.0.32 network. The 192.168.0.36 network link should serve as a backup when the OSPF link goes down. The\n floating static route command ip route 0.0.0.0 0.0.0.0 S0/0/1 100 was issued on R1 and now traffic is using the\n backup link even when the OSPF link is up and functioning. Which change should be made to the static route command\n so that traffic will only use the OSPF link when it is up?",
+ "id": "heX230of1",
+ "title": "91. Refer to the exhibit. Router R1 has an OSPF neighbor relationship with the ISP router over the\n 192.168.0.32 network. The 192.168.0.36 network link should serve as a backup when the OSPF link goes down. The\n floating static route command ip route 0.0.0.0 0.0.0.0 S0/0/1 100 was issued on R1 and now traffic is using the\n backup link even when the OSPF link is up and functioning. Which change should be made to the static route command\n so that traffic will only use the OSPF link when it is up?
",
"images": [
"https://itexamanswers.net/wp-content/uploads/2017/06/7-1.jpg"
],
@@ -1279,8 +1279,8 @@
"correct": "q91-3"
},
{
- "id": "Myx2nRP7y",
- "title": "92. Refer to the exhibit. All hosts and router interfaces are configured correctly. Pings to the server from\n both H1 and H2 and pings between H1 and H2 are not successful. What is causing this problem?",
+ "id": "ztE1gYWVk",
+ "title": "92. Refer to the exhibit. All hosts and router interfaces are configured correctly. Pings to the server from\n both H1 and H2 and pings between H1 and H2 are not successful. What is causing this problem?
",
"images": [
"https://itexamanswers.net/wp-content/uploads/2017/06/10.jpg"
],
@@ -1295,8 +1295,8 @@
"correct": "q92-2"
},
{
- "id": "Yr725ynzI",
- "title": "93. What caused the following error message to appear?",
+ "id": "63xBJLUcZ",
+ "title": "93. What caused the following error message to appear?
01:11:12: %PM-4-ERR_DISABLE:\n psecure-violation error detected on Fa0/8, putting Fa0/8 in err-disable state
01:11:12:\n %PORT_SECURITY-2-PSECURE_VIOLATION: Security violation occurred, caused by MAC address 0011.a0d4.12a0 on port\n FastEthernet0/8.
01:11:13: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/8,\n changed state to down
01:11:14: %LINK-3-UPDOWN: Interface FastEthernet0/8, changed state to\n down",
"images": [],
"type": 0,
"options": {
@@ -1309,8 +1309,8 @@
"correct": "q93-4"
},
{
- "id": "na7S6HMdt",
- "title": "94. Refer to the exhibit. A small business uses VLANs 2, 3, 4, and 5 between two switches that have a trunk\n link between them. What native VLAN should be used on the trunk if Cisco best practices are being\n implemented?",
+ "id": "WGbjwGFsd",
+ "title": "94. Refer to the exhibit. A small business uses VLANs 2, 3, 4, and 5 between two switches that have a trunk\n link between them. What native VLAN should be used on the trunk if Cisco best practices are being\n implemented?
",
"images": [
"https://itexamanswers.net/wp-content/uploads/2017/06/24.jpg"
],
@@ -1327,7 +1327,7 @@
"correct": "q94-4"
},
{
- "id": "KWVETcvUT",
+ "id": "HGAPeIsRD",
"title": "95. Which statement describes a characteristic of the extended range VLANs that are created on a Cisco 2960\n switch?",
"images": [],
"type": 0,
@@ -1340,7 +1340,7 @@
"correct": "q95-3"
},
{
- "id": "z9n1bKxf9",
+ "id": "E9yMK-fqz",
"title": "96. A network administrator is using the router-on-a-stick method to configure inter-VLAN routing. Switch\n port Gi1/1 is used to connect to the router. Which command should be entered to prepare this port for the\n task?",
"images": [],
"type": 0,
@@ -1353,7 +1353,7 @@
"correct": "q96-2"
},
{
- "id": "N8FR-NcO-",
+ "id": "6wnZt_257",
"title": "97. What will be the result of adding the command ip dhcp excluded-address 172.16.4.1 172.16.4.5 to the\n configuration of a local router that has been configured as a DHCP server?",
"images": [],
"type": 0,
@@ -1366,7 +1366,7 @@
"correct": "q97-2"
},
{
- "id": "uNopVUAad",
+ "id": "m6c8-3eNn",
"title": "98. A host on the 10.10.100.0/24 LAN is not being assigned an IPv4 address by an enterprise DHCP server with\n the address 10.10.200.10/24. What is the best way for the network engineer to resolve this problem?",
"images": [],
"type": 0,
@@ -1379,8 +1379,8 @@
"correct": "q98-0"
},
{
- "id": "N_Zsh4_8T",
- "title": "99. What is used in the EUI-64 process to create an IPv6 interface ID on an IPv6 enabled interface?",
+ "id": "IxjiShpWN",
+ "title": "99. What is used in the EUI-64 process to create an IPv6 interface ID on an IPv6 enabled interface?
\n",
"images": [],
"type": 0,
"options": {
@@ -1392,8 +1392,8 @@
"correct": "q99-0"
},
{
- "id": "Y30v7RDHO",
- "title": "100. Refer to the exhibit. NAT is configured on RT1 and RT2. The PC is sending a request to the web server.\n What IPv4 address is the source IP address in the packet between RT2 and the web server?",
+ "id": "_hcHevyrT",
+ "title": "100. Refer to the exhibit. NAT is configured on RT1 and RT2. The PC is sending a request to the web server.\n What IPv4 address is the source IP address in the packet between RT2 and the web server?
",
"images": [
"https://itexamanswers.net/wp-content/uploads/2017/06/36.jpg"
],
@@ -1409,8 +1409,8 @@
"correct": "q100-5"
},
{
- "id": "9EWTjf3dr",
- "title": "101. Refer to the exhibit. A company has an internal network of 172.16.25.0/24 for their employee\n workstations and a DMZ network of 172.16.12.0/24 to host servers. The company uses NAT when inside hosts connect\n to outside network. A network administrator issues the show ip nat translations command to check the NAT\n configurations. Which one of source IPv4 addresses is translated by R1 with PAT?",
+ "id": "jq_1GqaV6",
+ "title": "101. Refer to the exhibit. A company has an internal network of 172.16.25.0/24 for their employee\n workstations and a DMZ network of 172.16.12.0/24 to host servers. The company uses NAT when inside hosts connect\n to outside network. A network administrator issues the show ip nat translations command to check the NAT\n configurations. Which one of source IPv4 addresses is translated by R1 with PAT?
",
"images": [
"https://itexamanswers.net/wp-content/uploads/2017/01/ccna2.png"
],
@@ -1425,7 +1425,7 @@
"correct": "q101-4"
},
{
- "id": "k-7sYYIY7",
+ "id": "QZwr0IjA6",
"title": "102. What is the purpose of the Cisco PAK?",
"images": [],
"type": 0,
@@ -1438,8 +1438,8 @@
"correct": "q102-0"
},
{
- "id": "gB8dShJv7",
- "title": "103. What is the major release number in the IOS image name c1900-universalk9-mz.SPA.152-3.T.bin?",
+ "id": "NQdDD34ZS",
+ "title": "103. What is the major release number in the IOS image name c1900-universalk9-mz.SPA.152-3.T.bin?
\n",
"images": [],
"type": 0,
"options": {
@@ -1453,7 +1453,7 @@
"correct": "q103-1"
},
{
- "id": "M9vTKC-d0",
+ "id": "hGcXkXBIM",
"title": "104. What is the reason that an ISP commonly assigns a DHCP address to a wireless router in a SOHO\n environment?",
"images": [],
"type": 0,
@@ -1466,7 +1466,7 @@
"correct": "q104-1"
},
{
- "id": "ix_gDlQxf",
+ "id": "9QGV3uZTr",
"title": "105. Refer to the exhibit. What does the number 17:46:26:143 represent?",
"images": [
"https://itexamanswers.net/wp-content/uploads/2016/02/2017-03-08_181316.png"
@@ -1481,7 +1481,7 @@
"correct": "q105-1"
},
{
- "id": "kfv0m2h_L",
+ "id": "9rKmroLoT",
"title": "106. What statement describes a Cisco IOS image with the “universalk9_npe” designation for Cisco ISR G2\n routers?",
"images": [],
"type": 0,
@@ -1494,7 +1494,7 @@
"correct": "q106-1"
},
{
- "id": "y_SZx5-Uy",
+ "id": "NyqH6LBzG",
"title": "107. Refer to the exhibit. Routers R1 and R2 are connected via a serial link. One router is configured as the\n NTP master, and the other is an NTP client. Which two pieces of information can be obtained from the partial\n output of the show ntp associations detail command on R2? (Choose two. )",
"images": [
"https://itexamanswers.net/wp-content/uploads/2016/02/2017-03-08_183325.png"
@@ -1513,7 +1513,7 @@
]
},
{
- "id": "D1pE2iDTf",
+ "id": "LejbpJ69y",
"title": "108. A network administrator configures a router with the command sequence: R1(config)# boot system\n tftp://c1900-universalk9-mz.SPA.152-4.M3.bin R1(config)# boot system rom What is the effect of the\n command sequence?",
"images": [],
"type": 0,
@@ -1526,7 +1526,7 @@
"correct": "q108-1"
},
{
- "id": "F6e2QXBi5",
+ "id": "XyiqZD2h-",
"title": "109. What is used as the default event logging destination for Cisco routers and switches?",
"images": [],
"type": 0,
@@ -1539,7 +1539,7 @@
"correct": "q109-1"
},
{
- "id": "ALEFjs_L-",
+ "id": "-iYRFC2Ag",
"title": "110. Refer to the exhibit. Which two ACLs would permit only the two LAN networks attached to R2 to access the\n network that connects to R1 G0/0 interface? (Choose two.)",
"images": [
"https://itexamanswers.net/wp-content/uploads/2017/03/2017-03-09_143739.jpg"
@@ -1558,7 +1558,7 @@
]
},
{
- "id": "6cVEXOiqb",
+ "id": "sW4DOVv-k",
"title": "111. A network administrator configures a router to provide stateful DHCPv6 operation. However, users report\n that workstations do not receive IPv6 addresses within the scope. Which configuration command should be checked to\n ensure that statefull DHCPv6 is implemented?",
"images": [],
"type": 0,
@@ -1571,7 +1571,7 @@
"correct": "q111-0"
},
{
- "id": "UIruodC1C",
+ "id": "-msvAir71",
"title": "112. Which kind of message is sent by a DHCP client when its IP address lease has expired?",
"images": [],
"type": 0,
@@ -1584,7 +1584,7 @@
"correct": "q112-2"
},
{
- "id": "hyGVBsmEW",
+ "id": "bbg8TcRN0",
"title": "113. What is a disadvantage of NAT?",
"images": [],
"type": 0,
@@ -1597,7 +1597,7 @@
"correct": "q113-0"
},
{
- "id": "eLj81DE27",
+ "id": "OpXN_yqiY",
"title": "114. Refer to the exhibit. The Gigabit interfaces on both routers have been configured with subinterface\n numbers that match the VLAN numbers connected to them. PCs on VLAN 10 should be able to print to the P1 printer on\n VLAN 12. PCs on VLAN 20 should print to the printers on VLAN 22. What interface and in what direction should you\n place a standard ACL that allows printing to P1 from data VLAN 10, but stops the PCs on VLAN 20 from using the P1\n printer? (Choose two.)",
"images": [
"https://itexamanswers.net/wp-content/uploads/2016/02/i215806v1n2_215806.jpg"
@@ -1617,7 +1617,7 @@
]
},
{
- "id": "y6xciHFRi",
+ "id": "-gTkXg7-T",
"title": "115. Which two packet filters could a network administrator use on an IPv4 extended ACL? (Choose\n two.)",
"images": [],
"type": 1,
@@ -1635,7 +1635,7 @@
]
},
{
- "id": "GHgPOuN-k",
+ "id": "0M1OnVNAI",
"title": "116. A network administrator is explaining to a junior colleague the use of the lt and gt keywords when\n filtering packets using an extended ACL. Where would the lt or gt keywords be used?",
"images": [],
"type": 0,
@@ -1648,7 +1648,7 @@
"correct": "q116-3"
},
{
- "id": "Xmq1ZS3Sg",
+ "id": "1zpQ_TrOE",
"title": "117. Which three values or sets of values are included when creating an extended access control list entry?\n (Choose three.)",
"images": [],
"type": 1,
@@ -1668,8 +1668,8 @@
]
},
{
- "id": "0Z8tnH-Ul",
- "title": "118. A network administrator is adding ACLs to a new IPv6 multirouter environment. Which IPv6 ACE is\n automatically added implicitly at the end of an ACL so that two adjacent routers can discover each other?",
+ "id": "xmvwWF3N9",
+ "title": "118. A network administrator is adding ACLs to a new IPv6 multirouter environment. Which IPv6 ACE is\n automatically added implicitly at the end of an ACL so that two adjacent routers can discover each other?
\n",
"images": [],
"type": 0,
"options": {
@@ -1681,7 +1681,7 @@
"correct": "q118-2"
},
{
- "id": "CVY4aE6-N",
+ "id": "HxUR4VizE",
"title": "119. Refer to the exhibit. How did the router obtain the last route that is shown?",
"images": [
"https://itexamanswers.net/wp-content/uploads/2016/02/i209416v1n1_209416-1.png"
@@ -1696,7 +1696,7 @@
"correct": "q119-2"
},
{
- "id": "3ceue6WUW",
+ "id": "ZLlfCo7wL",
"title": "120. Which statement is correct about IPv6 routing?",
"images": [],
"type": 0,
@@ -1709,8 +1709,8 @@
"correct": "q120-3"
},
{
- "id": "vu3Io0X4V",
- "title": "121. Refer to the exhibit. Which type of route is 172.16.0.0/16?",
+ "id": "XrV7REl8H",
+ "title": "121. Refer to the exhibit. Which type of route is 172.16.0.0/16?
",
"images": [
"https://itexamanswers.net/wp-content/uploads/2016/02/i211955v1n2_211955.jpg"
],
@@ -1724,7 +1724,7 @@
"correct": "q121-3"
},
{
- "id": "IXpv7y844",
+ "id": "9HM-lFYnm",
"title": "122. Refer to the exhibit. Which type of IPv6 static route is configured in the exhibit?",
"images": [
"https://itexamanswers.net/wp-content/uploads/2017/02/2017-02-18_154301.jpg"
@@ -1739,7 +1739,7 @@
"correct": "q122-1"
},
{
- "id": "0FQobrAb3",
+ "id": "hQbPrjkAg",
"title": "123. Which summary IPv6 static route statement can be configured to summarize only the routes to networks\n 2001:db8:cafe::/58 through 2001:db8:cafe:c0::/58?",
"images": [],
"type": 0,
@@ -1752,7 +1752,7 @@
"correct": "q123-2"
},
{
- "id": "QetwNcEJe",
+ "id": "_XhNCuWVo",
"title": "124. Refer to the exhibit. If RIPng is enabled, how many hops away does R1 consider the 2001:0DB8:ACAD:1::/64\n network to be?",
"images": [
"https://itexamanswers.net/wp-content/uploads/2017/02/2017-02-18_145534.jpg"
@@ -1767,7 +1767,7 @@
"correct": "q124-2"
},
{
- "id": "B-ivO6Mzh",
+ "id": "kZAncmRMJ",
"title": "125. Which statement is true about the difference between OSPFv2 and OSPFv3?",
"images": [],
"type": 0,
@@ -1780,7 +1780,7 @@
"correct": "q125-3"
},
{
- "id": "UDbd1mPmv",
+ "id": "UNdjkKM3y",
"title": "126. What happens immediately after two OSPF routers have exchanged hello packets and have formed a neighbor\n adjacency?",
"images": [],
"type": 0,
@@ -1793,7 +1793,7 @@
"correct": "q126-3"
},
{
- "id": "sfnNzN4IA",
+ "id": "NEe5ZiIfC",
"title": "127. What does the cost of an OSPF link indicate?",
"images": [],
"type": 0,
@@ -1806,7 +1806,7 @@
"correct": "q127-3"
},
{
- "id": "qJLr6HTmR",
+ "id": "HGymdehhq",
"title": "128. Which three pieces of information does a link-state routing protocol use initially as link-state\n information for locally connected links? (Choose three.)",
"images": [],
"type": 1,
@@ -1824,7 +1824,7 @@
]
},
{
- "id": "zIdERd7hY",
+ "id": "zuP78qRWv",
"title": "129. Which three requirements are necessary for two OSPFv2 routers to form an adjacency? (Choose\n three.)",
"images": [],
"type": 1,
@@ -1844,7 +1844,7 @@
]
},
{
- "id": "y7TuRGrGu",
+ "id": "MBumc727p",
"title": "130. A router needs to be configured to route within OSPF area 0. Which two commands are required to\n accomplish this? (Choose two.)",
"images": [],
"type": 1,
@@ -1861,7 +1861,7 @@
]
},
{
- "id": "4gRj8y8s7",
+ "id": "_pNf3GnqQ",
"title": "131. What are two features of a link-state routing protocol? (Choose two.)",
"images": [],
"type": 1,
@@ -1878,7 +1878,7 @@
]
},
{
- "id": "DJAIf7uyw",
+ "id": "tkdGlNDcb",
"title": "132. Why would an administrator use a network security auditing tool to flood the switch MAC address table\n with fictitious MAC addresses?",
"images": [],
"type": 0,
@@ -1891,7 +1891,7 @@
"correct": "q132-0"
},
{
- "id": "Ptq2H6rbH",
+ "id": "SF_28Hf-L",
"title": "133. Which problem is evident if the show ip interface command shows that the interface is down and the line\n protocol is down?",
"images": [],
"type": 0,
@@ -1904,7 +1904,7 @@
"correct": "q133-1"
},
{
- "id": "D4F2DqxEt",
+ "id": "HXm6fVVWk",
"title": "134. While analyzing log files, a network administrator notices reoccurring native VLAN mismatches. What is\n the effect of these reoccurring errors?",
"images": [],
"type": 0,
@@ -1917,7 +1917,7 @@
"correct": "q134-1"
},
{
- "id": "iUTDu8ylP",
+ "id": "8-lN3k-ZP",
"title": "135. Which three pairs of trunking modes will establish a functional trunk link between two Cisco switches?\n (Choose three.)",
"images": [],
"type": 1,
@@ -1936,7 +1936,7 @@
]
},
{
- "id": "PXelLv4PL",
+ "id": "Dw38zkAOd",
"title": "136. What are two ways of turning off DTP on a trunk link between switches? (Choose two.)",
"images": [],
"type": 1,
@@ -1953,7 +1953,7 @@
]
},
{
- "id": "i7PsONKLS",
+ "id": "l-prQQNOF",
"title": "137. On a switch that is configured with multiple VLANs, which command will remove only VLAN 100 from the\n switch?",
"images": [],
"type": 0,
@@ -1966,7 +1966,7 @@
"correct": "q137-3"
},
{
- "id": "wsTjqN-ok",
+ "id": "Naelh_xYq",
"title": "138. What is the purpose of setting the native VLAN separate from data VLANs?",
"images": [],
"type": 0,
@@ -1979,7 +1979,7 @@
"correct": "q138-2"
},
{
- "id": "bnawpJ7S2",
+ "id": "wgdYKemTY",
"title": "139. A network contains multiple VLANs spanning multiple switches. What happens when a device in VLAN 20\n sends a broadcast Ethernet frame?",
"images": [],
"type": 0,
@@ -1992,7 +1992,7 @@
"correct": "q139-2"
},
{
- "id": "-6w0LZnJr",
+ "id": "ny_D1nPo7",
"title": "140. Refer to the exhibit. The partial configuration that is shown was used to configure router on a stick\n for VLANS 10, 30, and 50. However, testing shows that there are some connectivity problems between the VLANs.\n Which configuration error is causing this problem?",
"images": [
"https://itexamanswers.net/wp-content/uploads/2016/02/i212644v1n2_212644.jpg"
@@ -2007,7 +2007,7 @@
"correct": "q140-2"
},
{
- "id": "690qUiGZa",
+ "id": "MjyLoBYbF",
"title": "141. What is the purpose of an access list that is created as part of configuring IP address\n translation?",
"images": [],
"type": 0,
@@ -2020,7 +2020,7 @@
"correct": "q141-1"
},
{
- "id": "0JdQSGtNa",
+ "id": "es1Yh32Ms",
"title": "143. Beginning with the Cisco IOS Software Release 15.0, which license is a prerequisite for installing\n additional technology pack licenses?",
"images": [],
"type": 0,
@@ -2033,8 +2033,8 @@
"correct": "q143-1"
},
{
- "id": "dnhMsybzV",
- "title": "144. Refer to the exhibit. How many broadcast and collision domains exist in the topology?",
+ "id": "0jkiXweK2",
+ "title": "144. Refer to the exhibit. How many broadcast and collision domains exist in the topology?
\n ",
"images": [
"https://itexamanswers.net/wp-content/uploads/2016/02/i214792v1n1_5.jpg"
],
@@ -2048,7 +2048,7 @@
"correct": "q144-1"
},
{
- "id": "w8M21FOMw",
+ "id": "WfXgHRP30",
"title": "145. What is a function of the distribution layer?",
"images": [],
"type": 0,
@@ -2061,7 +2061,7 @@
"correct": "q145-3"
},
{
- "id": "rQav1vZ8u",
+ "id": "8bhAOqS9k",
"title": "150. When a Cisco switch receives untagged frames on a 802.1Q trunk port, which VLAN ID is the traffic\n switched to by default?",
"images": [],
"type": 0,
@@ -2074,8 +2074,8 @@
"correct": "q150-1"
},
{
- "id": "YRWrAv475",
- "title": "151. Refer to the exhibit. A Layer 3 switch routes for three VLANs and connects to a router for Internet\n connectivity. Which two configurations would be applied to the switch? (Choose two.)",
+ "id": "J1LtEOJ95",
+ "title": "151. Refer to the exhibit. A Layer 3 switch routes for three VLANs and connects to a router for Internet\n connectivity. Which two configurations would be applied to the switch? (Choose two.)
",
"images": [
"https://itexamanswers.net/wp-content/uploads/2016/02/11-final-ccna2.jpg"
],
@@ -2093,7 +2093,7 @@
]
},
{
- "id": "tBLe7cIsv",
+ "id": "CPKWzj9lX",
"title": "152. How is the router ID for an OSPFv3 router determined?",
"images": [],
"type": 0,
@@ -2106,8 +2106,8 @@
"correct": "q152-2"
},
{
- "id": "sJTKNUt0K",
- "title": "153. Which two statements are characteristics of routed ports on a multilayer switch? (Choose two.)",
+ "id": "6Q2FeFEbY",
+ "title": "153. Which two statements are characteristics of routed ports on a multilayer switch? (Choose two.)
\n",
"images": [],
"type": 1,
"options": {
@@ -2123,7 +2123,7 @@
]
},
{
- "id": "4-lxH-y0t",
+ "id": "W4uyIPSVM",
"title": "155. A small-sized company has 20 workstations and 2 servers. The company has been assigned a group of IPv4\n addresses 209.165.200.224/29 from its ISP. What technology should the company implement in order to allow the\n workstations to access the services over the Internet?",
"images": [],
"type": 1,
@@ -2139,7 +2139,7 @@
]
},
{
- "id": "T5ZJEQcYN",
+ "id": "280x5pFso",
"title": "156. What best describes the operation of distance vector routing protocols?",
"images": [],
"type": 0,
@@ -2152,7 +2152,7 @@
"correct": "q156-1"
},
{
- "id": "_lY8kLAg2",
+ "id": "fDL2p6lrO",
"title": "157. Which three advantages are provided by static routing? (Choose three.)",
"images": [],
"type": 1,
@@ -2170,7 +2170,7 @@
]
},
{
- "id": "HaXX-uflJ",
+ "id": "kZ2F7wAXg",
"title": "158. When configuring a switch to use SSH for virtual terminal connections, what is the purpose of the crypto\n key generate rsa command?",
"images": [],
"type": 0,
@@ -2184,7 +2184,7 @@
"correct": "q158-2"
},
{
- "id": "YVa9JzgUE",
+ "id": "twU-RNfS9",
"title": "159. Open the PT Activity. Perform the tasks in the activity instructions and then answer the question. What\n is the problem preventing PC0 and PC1 from communicating with PC2 and PC3?",
"images": [],
"type": 0,
@@ -2197,7 +2197,7 @@
"correct": "q159-1"
},
{
- "id": "n28T7DVUq",
+ "id": "J0xSZ27eR",
"title": "160. Which two commands can be used to verify the content and placement of access control lists? (Choose\n two.)",
"images": [],
"type": 1,
@@ -2213,8 +2213,8 @@
]
},
{
- "id": "gEKQlWYie",
- "title": "161. Refer to the exhibit.",
+ "id": "WmKkpsmKA",
+ "title": "161. Refer to the exhibit.
What summary static address would be configured on R1 to\n advertise to R3?",
"images": [
"https://itexamanswers.net/wp-content/uploads/2016/02/57-final-ccna2.jpg"
],
@@ -2228,7 +2228,7 @@
"correct": "q161-2"
},
{
- "id": "u46qJqhJM",
+ "id": "qI2f1tkB3",
"title": "162. Which value represents the “trustworthiness” of a route and is used to determine which route to install\n into the routing table when there are multiple routes toward the same destination?",
"images": [],
"type": 0,
@@ -2241,8 +2241,8 @@
"correct": "q162-3"
},
{
- "id": "7AZkuafKI",
- "title": "163. Which type of router memory temporarily stores the running configuration file and ARP table?",
+ "id": "f4q912LUb",
+ "title": "163. Which type of router memory temporarily stores the running configuration file and ARP table?
\n",
"images": [],
"type": 0,
"options": {
@@ -2254,7 +2254,7 @@
"correct": "q163-2"
},
{
- "id": "AwPRG6lo1",
+ "id": "2zZzHMueo",
"title": "164. Refer to the exhibit. If the switch reboots and all routers have to re-establish OSPF adjacencies, which\n routers will become the new DR and BDR?",
"images": [],
"type": 0,
@@ -2267,7 +2267,7 @@
"correct": "q164-2"
},
{
- "id": "2rKHv0Xu2",
+ "id": "UxfVw4NHQ",
"title": "165. Refer to the exhibit. The Branch Router has an OSPF neighbor relationship with the HQ router over the\n 198.51.0.4/30 network. The 198.51.0.8/30 network link should serve as a backup when the OSPF link goes down. The\n floating static route command ip route 0.0.0.0 0.0.0.0 S0/1/1 100 was issued on Branch and now traffic is using\n the backup link even when the OSPF link is up and functioning. Which change should be made to the static route\n command so that traffic will only use the OSPF link when it is up?",
"images": [],
"type": 0,
@@ -2280,7 +2280,7 @@
"correct": "q165-3"
},
{
- "id": "qczFSp5JC",
+ "id": "em6FgaIwg",
"title": "166. Refer to the exhibit. An attacker on PC X sends a frame with two 802.1Q tags on it, one for VLAN 40 and\n another for VLAN 12. What will happen to this frame?",
"images": [],
"type": 0,
@@ -2293,7 +2293,7 @@
"correct": "q166-2"
},
{
- "id": "UNOetRsT7",
+ "id": "gVtN-eAjk",
"title": "167. A new network policy requires an ACL to deny HTTP access from all guests to a web server at the main\n office. All guests use addressing from the IPv6 subnet 2001:DB8:19:C::/64. The web server is configured with the\n address 2001:DB8:19:A::105/64. Implementing the NoWeb ACL on the interface for the guest LAN requires which three\n commands? (Choose three.)",
"images": [],
"type": 1,
@@ -2313,7 +2313,7 @@
]
},
{
- "id": "7nb-S2vIZ",
+ "id": "miOKIS_mL",
"title": "168. An OSPF router has three directly connected networks; 172.16.0.0/16, 172.16.1.0/16, and 172.16.2.0/16.\n Which OSPF network command would advertise only the 172.16.1.0 network to neighbors?",
"images": [],
"type": 0,
@@ -2326,7 +2326,7 @@
"correct": "q168-0"
},
{
- "id": "7I3oft1oT",
+ "id": "XUYZs7uqT",
"title": "169. Which subnet mask would be used as the classful mask for the IP address 192.135.250.27?",
"images": [],
"type": 0,
@@ -2339,7 +2339,7 @@
"correct": "q169-2"
},
{
- "id": "hPaPkzfjL",
+ "id": "1_BXNmaA9",
"title": "170. Refer to the exhibit. A small business uses VLANs 8, 20, 25, and 30 on two switches that have a trunk\n link between them. What native VLAN should be used on the trunk if Cisco best practices are being\n implemented?",
"images": [
"https://itexamanswers.net/wp-content/uploads/2017/02/ccna1chap3-newquestion2.png"
@@ -2355,7 +2355,7 @@
"correct": "q170-0"
},
{
- "id": "tl3HN8t8A",
+ "id": "uzspsJf1Q",
"title": "171. The buffers for packet processing and the running configuration file are temporarily stored in which\n type of router memory?",
"images": [],
"type": 0,
@@ -2368,7 +2368,7 @@
"correct": "q171-2"
},
{
- "id": "_x3Qmt2az",
+ "id": "0JoqKR8Lh",
"title": "172. A standard ACL has been configured on a router to allow only clients from the 10.11.110.0/24 network to\n telnet or to ssh to the VTY lines of the router. Which command will correctly apply this ACL?",
"images": [],
"type": 0,
@@ -2381,7 +2381,7 @@
"correct": "q172-1"
},
{
- "id": "ZFtzH6D5Q",
+ "id": "L5Hb655Sz",
"title": "173. Refer to the exhibit.What address will summarize the LANs attached to routers 2-A and 3-A and can be\n configured in a summary static route to advertise them to an upstream neighbor?",
"images": [],
"type": 0,
@@ -2394,7 +2394,7 @@
"correct": "q173-3"
},
{
- "id": "XmlN5omSw",
+ "id": "ml9fWco_R",
"title": "174. A security specialist designs an ACL to deny access to a web server from all sales staff. The sales\n staff are assigned addressing from the IPv6 subnet 2001:db8:48:2c::/64. The web server is assigned the address\n 2001:db8:48:1c::50/64. Configuring the WebFilter ACL on the LAN interface for the sales staff will require which\n three commands? (Choose three.)",
"images": [],
"type": 1,
@@ -2414,7 +2414,7 @@
]
},
{
- "id": "POAzDocY8",
+ "id": "t84nug7xr",
"title": "175. To enable RIP routing for a specific subnet, the configuration command network 192.168.5.64 was entered\n by the network administrator. What address, if any, appears in the running configuration file to identify this\n network?",
"images": [],
"type": 0,
@@ -2427,7 +2427,7 @@
"correct": "q175-1"
},
{
- "id": "uFKeNh-Ek",
+ "id": "L3Sy1fgDt",
"title": "176. Refer to the exhibit. An ACL preventing FTP and HTTP access to the interval web server from all teaching\n assistants has been implemented in the Board Office. The address of the web server is 172.20.1.100 and all\n teaching assistants are assigned addresses in the 172.21.1.0/24 network. After implement the ACL, access to all\n servers is denied. What is the problem?",
"images": [],
"type": 0,
@@ -2440,7 +2440,7 @@
"correct": "q176-2"
},
{
- "id": "Wln2VbMJY",
+ "id": "7p233vELt",
"title": "177. A router learns of multiple toward the same destination. Which value in a routing table represents the\n trustworthiness of learned routes and is used by the router to determine which route to install into the routing\n table for specific situation?",
"images": [],
"type": 0,
@@ -2453,8 +2453,8 @@
"correct": "q177-0"
},
{
- "id": "bn-4SttIP",
- "title": "178. What is the minimum configuration for a router interface that is participating in IPv6 routing?",
+ "id": "_b-x9q38c",
+ "title": "178. What is the minimum configuration for a router interface that is participating in IPv6 routing?
\n",
"images": [],
"type": 0,
"options": {
@@ -2467,8 +2467,8 @@
"correct": "q178-3"
},
{
- "id": "kr0xpe4x4",
- "title": "179. Which two statements are true about half-duplex and full-duplex communications? (Choose two.)",
+ "id": "zFDINYCEW",
+ "title": "179. Which two statements are true about half-duplex and full-duplex communications? (Choose two.)
\n",
"images": [],
"type": 1,
"options": {
@@ -2484,7 +2484,7 @@
]
},
{
- "id": "ZKal7C5jj",
+ "id": "6yRTgWNrC",
"title": "181. Which two commands should be implemented to return a Cisco 3560 trunk port to its default configuration?\n (Choose two.)",
"images": [],
"type": 1,
@@ -2501,7 +2501,7 @@
]
},
{
- "id": "uiQ8yaMMA",
+ "id": "CR_6GGL12",
"title": "182. Which command will enable auto-MDIX on a device?",
"images": [],
"type": 0,
@@ -2514,7 +2514,7 @@
"correct": "q182-0"
},
{
- "id": "_NMDSuqpA",
+ "id": "4OZ1xcm_f",
"title": "183. What is the effect of issuing the passive-interface default command on a router that is configured for\n OSPF?",
"images": [],
"type": 0,
@@ -2527,7 +2527,7 @@
"correct": "q183-1"
},
{
- "id": "1fA-fsU2o",
+ "id": "niIr4r0ug",
"title": "184. A network administrator is implementing a distance vector routing protocol between neighbors on the\n network. In the context of distance vector protocols, what is a neighbor?",
"images": [],
"type": 0,
@@ -2540,7 +2540,7 @@
"correct": "q184-1"
},
{
- "id": "Smgy787sv",
+ "id": "Ov8O028I5",
"title": "185. Refer to the exhibit. A network administrator has just configured address translation and is verifying\n the configuration. What three things can the administrator verify? (Choose three.)",
"images": [
"https://itexamanswers.net/wp-content/uploads/2017/02/new-ccna-2-practice-exam-p53.png"
@@ -2561,7 +2561,7 @@
]
},
{
- "id": "6j_PgzrBX",
+ "id": "o5YRadWX7",
"title": "186. Which two methods can be used to provide secure management access to a Cisco switch? (Choose\n two.)",
"images": [],
"type": 1,
@@ -2578,7 +2578,7 @@
]
},
{
- "id": "qt1qAsnav",
+ "id": "ZBEwnGgt2",
"title": "187. A router learns of multiple routes toward the same destination. Which value in a routing table\n represents the trustworthiness of learned routes and is used by the router to determine which route to install\n into the routing table for this specific situation?",
"images": [],
"type": 0,
@@ -2591,7 +2591,7 @@
"correct": "q187-3"
},
{
- "id": "5m4CT4XFZ",
+ "id": "5VNyjjRVT",
"title": "188. Which value in a routing table represents trustworthiness and is used by the router to determine which\n route to install into the routing table when there are multiple routes toward the same destination?",
"images": [],
"type": 0,
@@ -2604,7 +2604,7 @@
"correct": "q188-0"
},
{
- "id": "ZppHcKZSh",
+ "id": "zk-Q_59Sa",
"title": "189. The network address 172.18.9.128 with netmask 255.255.255.128 is matched by which wildcard\n mask?",
"images": [],
"type": 0,
@@ -2617,7 +2617,7 @@
"correct": "q189-2"
},
{
- "id": "Mw32n1kvq",
+ "id": "ACGR9kBU-",
"title": "190. Which three addresses could be used as the destination address for OSPFv3 messages? (Choose\n three.)",
"images": [],
"type": 1,
@@ -2636,7 +2636,7 @@
]
},
{
- "id": "ZfQPzhgEu",
+ "id": "FYl_42ejK",
"title": "193. What are two reasons that will prevent two routers from forming an OSPFv2 adjacency? (Choose\n two.)",
"images": [],
"type": 1,
@@ -2653,7 +2653,7 @@
]
},
{
- "id": "K55U44ric",
+ "id": "n8Oez0xom",
"title": "195. Refer to the exhibit. An ACL preventing FTP and HTTP access to the internal web server from all teaching\n assistants has been implemented in the Board office. The address of the web server is 172.20.1.100 and all\n teaching assistants are assigned addresses in the 172.21.1.0/24 network. After implementing the ACL, access to all\n servers is denied. What is the problem?",
"images": [],
"type": 0,
@@ -2666,7 +2666,7 @@
"correct": "q195-1"
},
{
- "id": "EftgIX96q",
+ "id": "nXPR_NaKN",
"title": "196. Refer to the exhibit. A new network policy requires an ACL denying FTP and Telnet access to a Corp file\n server from all interns. The address of the file server is 172.16.1.15 and all interns are assigned addresses in\n the 172.18.200.0/24 network. After implementing the ACL, no one in the Corp network can access any of the servers.\n What is the problem?",
"images": [],
"type": 1,
@@ -2682,8 +2682,8 @@
]
},
{
- "id": "Jug446AN7",
- "title": "198. Refer to the exhibit. Based on the exhibited configuration and output, why is VLAN 99\n missing?",
+ "id": "HNxsVX32v",
+ "title": "198. Refer to the exhibit. Based on the exhibited configuration and output, why is VLAN 99\n missing?
",
"images": [
"https://itexamanswers.net/wp-content/uploads/2017/06/48-1.jpg"
],