diff --git a/data.json b/data.json
index 61adc33..4f62739 100644
--- a/data.json
+++ b/data.json
@@ -1,7 +1,6 @@
{
"title": "CCNA 2 Finals",
- "questions": [
- {
+ "questions": [{
"id": "vQbpa_5",
"title": "1. Refer to the exhibit. Assuming that the routing tables are up to date and no ARP messages are needed,\n after a packet leaves H1, how many times is the L2 header rewritten in the path to H2?
",
"images": [
@@ -1436,1265 +1435,6 @@
"q102-3": "It is a way to compress an existing IOS so that a newer IOS version can be co-installed on a router."
},
"correct": "q102-0"
- },
- {
- "id": "NQdDD34ZS",
- "title": "103. What is the major release number in the IOS image name c1900-universalk9-mz.SPA.152-3.T.bin?
\n",
- "images": [],
- "type": 0,
- "options": {
- "q103-0": "2",
- "q103-1": "15",
- "q103-2": "3",
- "q103-3": "52",
- "q103-4": "1900",
- "q103-5": "17"
- },
- "correct": "q103-1"
- },
- {
- "id": "hGcXkXBIM",
- "title": "104. What is the reason that an ISP commonly assigns a DHCP address to a wireless router in a SOHO\n environment?",
- "images": [],
- "type": 0,
- "options": {
- "q104-0": "better connectivity",
- "q104-1": "easy IP address management",
- "q104-2": "better network performance",
- "q104-3": "easy configuration on ISP firewall"
- },
- "correct": "q104-1"
- },
- {
- "id": "9QGV3uZTr",
- "title": "105. Refer to the exhibit. What does the number 17:46:26:143 represent?",
- "images": [
- "https://itexamanswers.net/wp-content/uploads/2016/02/2017-03-08_181316.png"
- ],
- "type": 0,
- "options": {
- "q105-0": "The time passed since the syslog server has been started",
- "q105-1": "the time when the syslog massage was issued",
- "q105-2": "the time on the router when the show logging command was issued",
- "q105-3": "the time pass since the interfaces have been up"
- },
- "correct": "q105-1"
- },
- {
- "id": "9rKmroLoT",
- "title": "106. What statement describes a Cisco IOS image with the “universalk9_npe” designation for Cisco ISR G2\n routers?",
- "images": [],
- "type": 0,
- "options": {
- "q106-0": "It is an IOS version that provides only the IPBase feature set.",
- "q106-1": "It is an IOS version that, at the request of some countries, removes any\n strong cryptographic functionality.",
- "q106-2": "It is an IOS version that offers all of the Cisco IOS Software feature sets.",
- "q106-3": "It is an IOS version that can only be used in the United States of America."
- },
- "correct": "q106-1"
- },
- {
- "id": "NyqH6LBzG",
- "title": "107. Refer to the exhibit. Routers R1 and R2 are connected via a serial link. One router is configured as the\n NTP master, and the other is an NTP client. Which two pieces of information can be obtained from the partial\n output of the show ntp associations detail command on R2? (Choose two. )",
- "images": [
- "https://itexamanswers.net/wp-content/uploads/2016/02/2017-03-08_183325.png"
- ],
- "type": 1,
- "options": {
- "q107-0": "Both routers are configured to use NTPv2.",
- "q107-1": "Router R1 is the master, and R2 is the client.",
- "q107-2": "Router R2 is the master, and R1 is the client.",
- "q107-3": "The IP address of R1 is 192. 168. 1. 2.",
- "q107-4": "The IP address of R2 is 192. 168. 1. 2."
- },
- "correct": [
- "q107-1",
- "q107-4"
- ]
- },
- {
- "id": "LejbpJ69y",
- "title": "108. A network administrator configures a router with the command sequence: R1(config)# boot system\n tftp://c1900-universalk9-mz.SPA.152-4.M3.bin R1(config)# boot system rom What is the effect of the\n command sequence?",
- "images": [],
- "type": 0,
- "options": {
- "q108-0": "The router will copy the IOS image from the TFTP server and then reboot the system.",
- "q108-1": "The router will load IOS from the TFTP server. If the image fails to load,\n it will load the IOS image from ROM",
- "q108-2": "The router will search and load a valid IOS image in the sequence of flash, TFTP, and ROM.",
- "q108-3": "On next reboot, the router will load the IOS image from ROM."
- },
- "correct": "q108-1"
- },
- {
- "id": "XyiqZD2h-",
- "title": "109. What is used as the default event logging destination for Cisco routers and switches?",
- "images": [],
- "type": 0,
- "options": {
- "q109-0": "syslog server",
- "q109-1": "console line",
- "q109-2": "terminal line",
- "q109-3": "workstation"
- },
- "correct": "q109-1"
- },
- {
- "id": "-iYRFC2Ag",
- "title": "110. Refer to the exhibit. Which two ACLs would permit only the two LAN networks attached to R2 to access the\n network that connects to R1 G0/0 interface? (Choose two.)",
- "images": [
- "https://itexamanswers.net/wp-content/uploads/2017/03/2017-03-09_143739.jpg"
- ],
- "type": 1,
- "options": {
- "q110-0": "access-list 4 permit 192.168.10.0 0.0.0.255",
- "q110-1": "access-list 1 permit 192.168.10.128 0.0.0.127",
- "q110-2": "access-list 2 permit host 192.168.10.131 access-list 2 permit host\n 192.168.10.201",
- "q110-3": "access-list 5 permit 192.168.10.128 0.0.0.63* access-list 5 permit\n 192.168.10.192 0.0.0.63",
- "q110-4": "access-list 3 permit 192.168.10.128 0.0.0.63"
- },
- "correct": [
- "q110-2",
- "q110-3"
- ]
- },
- {
- "id": "sW4DOVv-k",
- "title": "111. A network administrator configures a router to provide stateful DHCPv6 operation. However, users report\n that workstations do not receive IPv6 addresses within the scope. Which configuration command should be checked to\n ensure that statefull DHCPv6 is implemented?",
- "images": [],
- "type": 0,
- "options": {
- "q111-0": "The dns-server line is included in the ipv6 dhcp pool\n section.",
- "q111-1": "The ipv6 nd managed-config-flag is entered for the interface facing the LAN segment.",
- "q111-2": "The ipv6 nd other-config-flag is entered for the interface facing the LAN segment.",
- "q111-3": "The domain-name line is included in the ipv6 dhcp pool section."
- },
- "correct": "q111-0"
- },
- {
- "id": "-msvAir71",
- "title": "112. Which kind of message is sent by a DHCP client when its IP address lease has expired?",
- "images": [],
- "type": 0,
- "options": {
- "q112-0": "a DHCPDISCOVER broadcast message",
- "q112-1": "a DHCPREQUEST broadcast message",
- "q112-2": "a DHCPREQUEST unicast message",
- "q112-3": "a DHCPDISCOVER unicast message"
- },
- "correct": "q112-2"
- },
- {
- "id": "bbg8TcRN0",
- "title": "113. What is a disadvantage of NAT?",
- "images": [],
- "type": 0,
- "options": {
- "q113-0": "There is no end-to-end addressing.",
- "q113-1": "The router does not need to alter the checksum of the IPv4 packets.",
- "q113-2": "The internal hosts have to use a single public IPv4 address for external communication.",
- "q113-3": "The costs of readdressing hosts can be significant for a publicly addressed network."
- },
- "correct": "q113-0"
- },
- {
- "id": "OpXN_yqiY",
- "title": "114. Refer to the exhibit. The Gigabit interfaces on both routers have been configured with subinterface\n numbers that match the VLAN numbers connected to them. PCs on VLAN 10 should be able to print to the P1 printer on\n VLAN 12. PCs on VLAN 20 should print to the printers on VLAN 22. What interface and in what direction should you\n place a standard ACL that allows printing to P1 from data VLAN 10, but stops the PCs on VLAN 20 from using the P1\n printer? (Choose two.)",
- "images": [
- "https://itexamanswers.net/wp-content/uploads/2016/02/i215806v1n2_215806.jpg"
- ],
- "type": 1,
- "options": {
- "q114-0": "R1 Gi0/1.12",
- "q114-1": "R1 S0/0/0",
- "q114-2": "R2 S0/0/1",
- "q114-3": "R2 Gi0/1.20",
- "q114-4": "inbound",
- "q114-5": "outbound"
- },
- "correct": [
- "q114-0",
- "q114-5"
- ]
- },
- {
- "id": "-gTkXg7-T",
- "title": "115. Which two packet filters could a network administrator use on an IPv4 extended ACL? (Choose\n two.)",
- "images": [],
- "type": 1,
- "options": {
- "q115-0": "destination MAC address",
- "q115-1": "ICMP message type",
- "q115-2": "computer type",
- "q115-3": "source TCP hello address",
- "q115-4": "destination UDP port number"
- },
- "correct": [
- "q115-0",
- "q115-1",
- "q115-4"
- ]
- },
- {
- "id": "0M1OnVNAI",
- "title": "116. A network administrator is explaining to a junior colleague the use of the lt and gt keywords when\n filtering packets using an extended ACL. Where would the lt or gt keywords be used?",
- "images": [],
- "type": 0,
- "options": {
- "q116-0": "in an IPv6 extended ACL that stops packets going to one specific destination VLAN",
- "q116-1": "in an IPv4 named standard ACL that has specific UDP protocols that are allowed to be used on a specific server",
- "q116-2": "in an IPv6 named ACL that permits FTP traffic from one particular LAN getting to another LAN",
- "q116-3": "in an IPv4 extended ACL that allows packets from a range of TCP ports destined\n for a specific network device"
- },
- "correct": "q116-3"
- },
- {
- "id": "1zpQ_TrOE",
- "title": "117. Which three values or sets of values are included when creating an extended access control list entry?\n (Choose three.)",
- "images": [],
- "type": 1,
- "options": {
- "q117-0": "access list number between 1 and 99",
- "q117-1": "access list number between 100 and 199",
- "q117-2": "default gateway address and wildcard mask",
- "q117-3": "destination address and wildcard mask",
- "q117-4": "source address and wildcard mask",
- "q117-5": "source subnet mask and wildcard mask",
- "q117-6": "destination subnet mask and wildcard mask"
- },
- "correct": [
- "q117-1",
- "q117-3",
- "q117-4"
- ]
- },
- {
- "id": "xmvwWF3N9",
- "title": "118. A network administrator is adding ACLs to a new IPv6 multirouter environment. Which IPv6 ACE is\n automatically added implicitly at the end of an ACL so that two adjacent routers can discover each other?
\n",
- "images": [],
- "type": 0,
- "options": {
- "q118-0": "permit ip any any",
- "q118-1": "permit ip any host ip_address",
- "q118-2": "permit icmp any any nd-na",
- "q118-3": "deny ip any any"
- },
- "correct": "q118-2"
- },
- {
- "id": "HxUR4VizE",
- "title": "119. Refer to the exhibit. How did the router obtain the last route that is shown?",
- "images": [
- "https://itexamanswers.net/wp-content/uploads/2016/02/i209416v1n1_209416-1.png"
- ],
- "type": 0,
- "options": {
- "q119-0": "The ip route command was used.",
- "q119-1": "The ipv6 route command was used.",
- "q119-2": "Another router in the same organization provided the default route by using a\n dynamic routing protocol.",
- "q119-3": "The ip address interface configuration mode command was used in addition to the network routing protocol\n configuration mode command."
- },
- "correct": "q119-2"
- },
- {
- "id": "ZLlfCo7wL",
- "title": "120. Which statement is correct about IPv6 routing?",
- "images": [],
- "type": 0,
- "options": {
- "q120-0": "IPv6 routing is enabled by default on Cisco routers.",
- "q120-1": "IPv6 only supports the OSPF and EIGRP routing protocols.",
- "q120-2": "IPv6 routes appear in the same routing table as IPv4 routes.",
- "q120-3": "IPv6 uses the link-local address of neighbors as the next-hop address for\n dynamic routes."
- },
- "correct": "q120-3"
- },
- {
- "id": "XrV7REl8H",
- "title": "121. Refer to the exhibit. Which type of route is 172.16.0.0/16?
",
- "images": [
- "https://itexamanswers.net/wp-content/uploads/2016/02/i211955v1n2_211955.jpg"
- ],
- "type": 0,
- "options": {
- "q121-0": "child route",
- "q121-1": "ultimate route",
- "q121-2": "default route",
- "q121-3": "level 1 parent route"
- },
- "correct": "q121-3"
- },
- {
- "id": "9HM-lFYnm",
- "title": "122. Refer to the exhibit. Which type of IPv6 static route is configured in the exhibit?",
- "images": [
- "https://itexamanswers.net/wp-content/uploads/2017/02/2017-02-18_154301.jpg"
- ],
- "type": 0,
- "options": {
- "q122-0": "directly attached static route",
- "q122-1": "recursive static route",
- "q122-2": "fully specified static route",
- "q122-3": "floating static route"
- },
- "correct": "q122-1"
- },
- {
- "id": "hQbPrjkAg",
- "title": "123. Which summary IPv6 static route statement can be configured to summarize only the routes to networks\n 2001:db8:cafe::/58 through 2001:db8:cafe:c0::/58?",
- "images": [],
- "type": 0,
- "options": {
- "q123-0": "ipv6 route 2001:db8:cafe::/62 S0/0/0",
- "q123-1": "ipv6 route 2001:db8:cafe::/54 S0/0/0",
- "q123-2": "ipv6 route 2001:db8:cafe::/56 S0/0/0",
- "q123-3": "ipv6 route 2001:db8:cafe::/60 S0/0/0"
- },
- "correct": "q123-2"
- },
- {
- "id": "_XhNCuWVo",
- "title": "124. Refer to the exhibit. If RIPng is enabled, how many hops away does R1 consider the 2001:0DB8:ACAD:1::/64\n network to be?",
- "images": [
- "https://itexamanswers.net/wp-content/uploads/2017/02/2017-02-18_145534.jpg"
- ],
- "type": 0,
- "options": {
- "q124-0": "1",
- "q124-1": "2",
- "q124-2": "3",
- "q124-3": "4"
- },
- "correct": "q124-2"
- },
- {
- "id": "kZAncmRMJ",
- "title": "125. Which statement is true about the difference between OSPFv2 and OSPFv3?",
- "images": [],
- "type": 0,
- "options": {
- "q125-0": "OSPFv3 routers use a different metric than OSPFv2 routers use.",
- "q125-1": "OSPFv3 routers use a 128 bit router ID instead of a 32 bit ID.",
- "q125-2": "OSPFv3 routers do not need to elect a DR on multiaccess segments.",
- "q125-3": "OSPFv3 routers do not need to have matching subnets to form neighbor\n adjacencies."
- },
- "correct": "q125-3"
- },
- {
- "id": "UNdjkKM3y",
- "title": "126. What happens immediately after two OSPF routers have exchanged hello packets and have formed a neighbor\n adjacency?",
- "images": [],
- "type": 0,
- "options": {
- "q126-0": "They exchange DBD packets in order to advertise parameters such as hello and dead intervals.",
- "q126-1": "They negotiate the election process if they are on a multiaccess network.",
- "q126-2": "They request more information about their databases.",
- "q126-3": "They exchange abbreviated lists of their LSDBs."
- },
- "correct": "q126-3"
- },
- {
- "id": "NEe5ZiIfC",
- "title": "127. What does the cost of an OSPF link indicate?",
- "images": [],
- "type": 0,
- "options": {
- "q127-0": "A higher cost for an OSPF link indicates a faster path to the destination.",
- "q127-1": "Link cost indicates a proportion of the accumulated value of the route to the destination.",
- "q127-2": "Cost equals bandwidth.",
- "q127-3": "A lower cost indicates a better path to the destination than a higher cost\n does."
- },
- "correct": "q127-3"
- },
- {
- "id": "HGymdehhq",
- "title": "128. Which three pieces of information does a link-state routing protocol use initially as link-state\n information for locally connected links? (Choose three.)",
- "images": [],
- "type": 1,
- "options": {
- "q128-0": "the link router interface IP address and subnet mask",
- "q128-1": "the type of network link",
- "q128-2": "the link next-hop IP address",
- "q128-3": "the link bandwidth",
- "q128-4": "the cost of that link"
- },
- "correct": [
- "q128-0",
- "q128-1",
- "q128-4"
- ]
- },
- {
- "id": "zuP78qRWv",
- "title": "129. Which three requirements are necessary for two OSPFv2 routers to form an adjacency? (Choose\n three.)",
- "images": [],
- "type": 1,
- "options": {
- "q129-0": "The two routers must include the inter-router link network in an OSPFv2 network\n command.",
- "q129-1": "The OSPFv2 process is enabled on the interface by entering the ospf process area-id command.",
- "q129-2": "The OSPF hello or dead timers on each router must match.",
- "q129-3": "The OSPFv2 process ID must be the same on each\n router.",
- "q129-4": "The link interface subnet masks must match.",
- "q129-5": "The link interface on each router must be configured with a link-local address."
- },
- "correct": [
- "q129-0",
- "q129-2",
- "q129-3",
- "q129-4"
- ]
- },
- {
- "id": "MBumc727p",
- "title": "130. A router needs to be configured to route within OSPF area 0. Which two commands are required to\n accomplish this? (Choose two.)",
- "images": [],
- "type": 1,
- "options": {
- "q130-0": "RouterA(config)# router ospf 0",
- "q130-1": "RouterA(config)# router ospf 1",
- "q130-2": "RouterA(config-router)# network 192.168.2.0 0.0.0.255 0",
- "q130-3": "RouterA(config-router)# network 192.168.2.0 0.0.0.255 area 0",
- "q130-4": "RouterA(config-router)# network 192.168.2.0 255.255.255.0 0"
- },
- "correct": [
- "q130-1",
- "q130-3"
- ]
- },
- {
- "id": "_pNf3GnqQ",
- "title": "131. What are two features of a link-state routing protocol? (Choose two.)",
- "images": [],
- "type": 1,
- "options": {
- "q131-0": "Routers send periodic updates only to neighboring routers.",
- "q131-1": "Routers send triggered updates in response to a change.",
- "q131-2": "Routers create a topology of the network by using information from other\n routers.",
- "q131-3": "The database information for each router is obtained from the same source.",
- "q131-4": "Paths are chosen based on the lowest number of hops to the designated router."
- },
- "correct": [
- "q131-1",
- "q131-2"
- ]
- },
- {
- "id": "tkdGlNDcb",
- "title": "132. Why would an administrator use a network security auditing tool to flood the switch MAC address table\n with fictitious MAC addresses?",
- "images": [],
- "type": 0,
- "options": {
- "q132-0": "to determine which ports are not correctly configured to prevent MAC address\n flooding",
- "q132-1": "to determine when the CAM table size needs to be increased in order to prevent overflows",
- "q132-2": "to determine if the switch is forwarding the broadcast traffic correctly",
- "q132-3": "to determine which ports are functioning"
- },
- "correct": "q132-0"
- },
- {
- "id": "SF_28Hf-L",
- "title": "133. Which problem is evident if the show ip interface command shows that the interface is down and the line\n protocol is down?",
- "images": [],
- "type": 0,
- "options": {
- "q133-0": "An encapsulation mismatch has occurred.",
- "q133-1": "A cable has not been attached to the port.",
- "q133-2": "The no shutdown command has not been issued on the interface.",
- "q133-3": "There is an IP address conflict with the configured address on the interface."
- },
- "correct": "q133-1"
- },
- {
- "id": "HXm6fVVWk",
- "title": "134. While analyzing log files, a network administrator notices reoccurring native VLAN mismatches. What is\n the effect of these reoccurring errors?",
- "images": [],
- "type": 0,
- "options": {
- "q134-0": "All traffic on the error-occurring trunk port is being misdirected or dropped.",
- "q134-1": "The control and management traffic on the error-occurring trunk port is being\n misdirected or dropped.",
- "q134-2": "All traffic on the error-occurring trunk port is being switched correctly regardless of the error.",
- "q134-3": "Unexpected traffic on the error-occurring trunk port is being received."
- },
- "correct": "q134-1"
- },
- {
- "id": "8-lN3k-ZP",
- "title": "135. Which three pairs of trunking modes will establish a functional trunk link between two Cisco switches?\n (Choose three.)",
- "images": [],
- "type": 1,
- "options": {
- "q135-0": "dynamic desirable – dynamic desirable",
- "q135-1": "dynamic auto – dynamic auto",
- "q135-2": "dynamic desirable – dynamic auto",
- "q135-3": "dynamic desirable – trunk",
- "q135-4": "access – trunk",
- "q135-5": "access – dynamic auto"
- },
- "correct": [
- "q135-0",
- "q135-2",
- "q135-3"
- ]
- },
- {
- "id": "Dw38zkAOd",
- "title": "136. What are two ways of turning off DTP on a trunk link between switches? (Choose two.)",
- "images": [],
- "type": 1,
- "options": {
- "q136-0": "Change the native VLAN on both ports.",
- "q136-1": "Configure attached switch ports with the dynamic desirable command option.",
- "q136-2": "Configure attached switch ports with the nonegotiate command\n option.",
- "q136-3": "Configure one port with the dynamic auto command option and the opposite attached switch port with the dynamic\n desirable command option.",
- "q136-4": "Place the two attached switch ports in access mode."
- },
- "correct": [
- "q136-2",
- "q136-4"
- ]
- },
- {
- "id": "l-prQQNOF",
- "title": "137. On a switch that is configured with multiple VLANs, which command will remove only VLAN 100 from the\n switch?",
- "images": [],
- "type": 0,
- "options": {
- "q137-0": "Switch# delete flash:vlan.dat",
- "q137-1": "Switch(config-if)# no switchport access vlan 100",
- "q137-2": "Switch(config-if)# no switchport trunk allowed vlan 100",
- "q137-3": "Switch(config)# no vlan 100"
- },
- "correct": "q137-3"
- },
- {
- "id": "Naelh_xYq",
- "title": "138. What is the purpose of setting the native VLAN separate from data VLANs?",
- "images": [],
- "type": 0,
- "options": {
- "q138-0": "The native VLAN is for carrying VLAN management traffic only.",
- "q138-1": "The security of management frames that are carried in the native VLAN can be enhanced.",
- "q138-2": "A separate VLAN should be used to carry uncommon untagged frames to avoid\n bandwidth contention on data VLANs.",
- "q138-3": "The native VLAN is for routers and switches to exchange their management information, so it should be different\n from data VLANs."
- },
- "correct": "q138-2"
- },
- {
- "id": "wgdYKemTY",
- "title": "139. A network contains multiple VLANs spanning multiple switches. What happens when a device in VLAN 20\n sends a broadcast Ethernet frame?",
- "images": [],
- "type": 0,
- "options": {
- "q139-0": "All devices in all VLANs see the frame.",
- "q139-1": "Devices in VLAN 20 and the management VLAN see the frame.",
- "q139-2": "Only devices in VLAN 20 see the frame.",
- "q139-3": "Only devices that are connected to the local switch see the frame."
- },
- "correct": "q139-2"
- },
- {
- "id": "ny_D1nPo7",
- "title": "140. Refer to the exhibit. The partial configuration that is shown was used to configure router on a stick\n for VLANS 10, 30, and 50. However, testing shows that there are some connectivity problems between the VLANs.\n Which configuration error is causing this problem?",
- "images": [
- "https://itexamanswers.net/wp-content/uploads/2016/02/i212644v1n2_212644.jpg"
- ],
- "type": 0,
- "options": {
- "q140-0": "A configuration for the native VLAN is missing.",
- "q140-1": "There is no IP address configured for the FastEthernet 0/0 interface.",
- "q140-2": "The wrong VLAN has been configured on subinterface Fa0/0.50.",
- "q140-3": "The VLAN IP addresses should belong to the same subnet."
- },
- "correct": "q140-2"
- },
- {
- "id": "MjyLoBYbF",
- "title": "141. What is the purpose of an access list that is created as part of configuring IP address\n translation?",
- "images": [],
- "type": 0,
- "options": {
- "q141-0": "The access list defines the valid public addresses for the NAT or PAT pool.",
- "q141-1": "The access list defines the private IP addresses that are to be\n translated.",
- "q141-2": "The access list prevents external devices from being a part of the address translation.",
- "q141-3": "The access list permits or denies specific addresses from entering the device doing the translation."
- },
- "correct": "q141-1"
- },
- {
- "id": "es1Yh32Ms",
- "title": "143. Beginning with the Cisco IOS Software Release 15.0, which license is a prerequisite for installing\n additional technology pack licenses?",
- "images": [],
- "type": 0,
- "options": {
- "q143-0": "UC",
- "q143-1": "IPBase",
- "q143-2": "SEC",
- "q143-3": "DATA"
- },
- "correct": "q143-1"
- },
- {
- "id": "0jkiXweK2",
- "title": "144. Refer to the exhibit. How many broadcast and collision domains exist in the topology?
\n ",
- "images": [
- "https://itexamanswers.net/wp-content/uploads/2016/02/i214792v1n1_5.jpg"
- ],
- "type": 0,
- "options": {
- "q144-0": "10 broadcast domains and 5 collision domains",
- "q144-1": "5 broadcast domains and 10 collision domains",
- "q144-2": "5 broadcast domains and 11 collision domains",
- "q144-3": "16 broadcast domains and 11 collision domains"
- },
- "correct": "q144-1"
- },
- {
- "id": "WfXgHRP30",
- "title": "145. What is a function of the distribution layer?",
- "images": [],
- "type": 0,
- "options": {
- "q145-0": "fault isolation",
- "q145-1": "network access to the user",
- "q145-2": "high-speed backbone connectivity",
- "q145-3": "interconnection of large-scale networks in wiring closets"
- },
- "correct": "q145-3"
- },
- {
- "id": "8bhAOqS9k",
- "title": "150. When a Cisco switch receives untagged frames on a 802.1Q trunk port, which VLAN ID is the traffic\n switched to by default?",
- "images": [],
- "type": 0,
- "options": {
- "q150-0": "data VLAN ID",
- "q150-1": "native VLAN ID",
- "q150-2": "unused VLAN ID",
- "q150-3": "management VLAN ID"
- },
- "correct": "q150-1"
- },
- {
- "id": "J1LtEOJ95",
- "title": "151. Refer to the exhibit. A Layer 3 switch routes for three VLANs and connects to a router for Internet\n connectivity. Which two configurations would be applied to the switch? (Choose two.)
",
- "images": [
- "https://itexamanswers.net/wp-content/uploads/2016/02/11-final-ccna2.jpg"
- ],
- "type": 1,
- "options": {
- "q151-0": "(config)# interface gigabitethernet 1/1 (config-if)# no\n switchport",
- "q151-1": "(config-if)# ip address 192.168.1.2 255.255.255.252 (config)# interface vlan 1 (config-if)# ip\n address 192.168.1.2 255.255.255.0 (config-if)# no shutdown",
- "q151-2": "(config)# interface gigabitethernet1/1 (config-if)# switchport mode trunk",
- "q151-3": "(config)# interface fastethernet0/4 (config-if)# switchport mode trunk",
- "q151-4": "(config)# ip routing"
- },
- "correct": [
- "q151-0",
- "q151-4"
- ]
- },
- {
- "id": "CPKWzj9lX",
- "title": "152. How is the router ID for an OSPFv3 router determined?",
- "images": [],
- "type": 0,
- "options": {
- "q152-0": "the highest IPv6 address on an active interface",
- "q152-1": "the highest EUI-64 ID on an active interface",
- "q152-2": "the highest IPv4 address on an active interface",
- "q152-3": "the lowest MAC address on an active interface"
- },
- "correct": "q152-2"
- },
- {
- "id": "6Q2FeFEbY",
- "title": "153. Which two statements are characteristics of routed ports on a multilayer switch? (Choose two.)
\n",
- "images": [],
- "type": 1,
- "options": {
- "q153-0": "In a switched network, they are mostly configured between switches at the\n core and distribution layers.",
- "q153-1": "They support subinterfaces, like interfaces on the Cisco IOS routers.",
- "q153-2": "The interface vlan command has to be entered to create a VLAN on routed ports.",
- "q153-3": "They are used for point-to-multipoint links.",
- "q153-4": "They are not associated with a particular VLAN."
- },
- "correct": [
- "q153-0",
- "q153-4"
- ]
- },
- {
- "id": "W4uyIPSVM",
- "title": "155. A small-sized company has 20 workstations and 2 servers. The company has been assigned a group of IPv4\n addresses 209.165.200.224/29 from its ISP. What technology should the company implement in order to allow the\n workstations to access the services over the Internet?",
- "images": [],
- "type": 1,
- "options": {
- "q155-0": "static NAT",
- "q155-1": "dynamic NAT",
- "q155-2": "port address translation ",
- "q155-3": "DHCP"
- },
- "correct": [
- "q155-1",
- "q155-2"
- ]
- },
- {
- "id": "280x5pFso",
- "title": "156. What best describes the operation of distance vector routing protocols?",
- "images": [],
- "type": 0,
- "options": {
- "q156-0": "They use hop count as their only metric.",
- "q156-1": "They send their routing tables to directly connected\n neighbors.",
- "q156-2": "They flood the entire network with routing updates.",
- "q156-3": "They only send out updates when a new network is added."
- },
- "correct": "q156-1"
- },
- {
- "id": "fDL2p6lrO",
- "title": "157. Which three advantages are provided by static routing? (Choose three.)",
- "images": [],
- "type": 1,
- "options": {
- "q157-0": "The path a static route uses to send data is known.",
- "q157-1": "No intervention is required to maintain changing route information.",
- "q157-2": "Static routing does not advertise over the network, thus providing better\n security.",
- "q157-3": "Static routing typically uses less network bandwidth and fewer CPU\n operations than dynamic routing does.",
- "q157-4": "Configuration of static routes is error-free. Static routes scale well as the network grows."
- },
- "correct": [
- "q157-0",
- "q157-2",
- "q157-3"
- ]
- },
- {
- "id": "kZ2F7wAXg",
- "title": "158. When configuring a switch to use SSH for virtual terminal connections, what is the purpose of the crypto\n key generate rsa command?",
- "images": [],
- "type": 0,
- "options": {
- "q158-0": "show active SSH ports on the switch",
- "q158-1": "disconnect SSH connected hosts",
- "q158-2": "create a public and private key pair",
- "q158-3": "show SSH connected hosts",
- "q158-4": "access the SSH database configuration"
- },
- "correct": "q158-2"
- },
- {
- "id": "twU-RNfS9",
- "title": "159. Open the PT Activity. Perform the tasks in the activity instructions and then answer the question. What\n is the problem preventing PC0 and PC1 from communicating with PC2 and PC3?",
- "images": [],
- "type": 0,
- "options": {
- "q159-0": "The routers are using different OSPF process IDs.",
- "q159-1": "The serial interfaces of the routers are in different\n subnets.",
- "q159-2": "No router ID has been configured on the routers.",
- "q159-3": "The gigabit interfaces are passive."
- },
- "correct": "q159-1"
- },
- {
- "id": "J0xSZ27eR",
- "title": "160. Which two commands can be used to verify the content and placement of access control lists? (Choose\n two.)",
- "images": [],
- "type": 1,
- "options": {
- "q160-0": "show processes show cdp neighbor",
- "q160-1": "show access-lists",
- "q160-2": "show ip route",
- "q160-3": "show running-config"
- },
- "correct": [
- "q160-1",
- "q160-3"
- ]
- },
- {
- "id": "WmKkpsmKA",
- "title": "161. Refer to the exhibit.
What summary static address would be configured on R1 to\n advertise to R3?",
- "images": [
- "https://itexamanswers.net/wp-content/uploads/2016/02/57-final-ccna2.jpg"
- ],
- "type": 0,
- "options": {
- "q161-0": "192.168.0.0/24",
- "q161-1": "192.168.0.0/23",
- "q161-2": "192.168.0.0/22",
- "q161-3": "192.168.0.0/21"
- },
- "correct": "q161-2"
- },
- {
- "id": "qI2f1tkB3",
- "title": "162. Which value represents the “trustworthiness” of a route and is used to determine which route to install\n into the routing table when there are multiple routes toward the same destination?",
- "images": [],
- "type": 0,
- "options": {
- "q162-0": "routing protocol",
- "q162-1": "outgoing interface",
- "q162-2": "metric",
- "q162-3": "administrative distance"
- },
- "correct": "q162-3"
- },
- {
- "id": "f4q912LUb",
- "title": "163. Which type of router memory temporarily stores the running configuration file and ARP table?
\n",
- "images": [],
- "type": 0,
- "options": {
- "q163-0": "flash",
- "q163-1": "NVRAM",
- "q163-2": "RAM",
- "q163-3": "ROM"
- },
- "correct": "q163-2"
- },
- {
- "id": "2zZzHMueo",
- "title": "164. Refer to the exhibit. If the switch reboots and all routers have to re-establish OSPF adjacencies, which\n routers will become the new DR and BDR?",
- "images": [],
- "type": 0,
- "options": {
- "q164-0": "Router R3 will become the DR and router R1 will become the BDR.",
- "q164-1": "Router R1 will become the DR and router R2 will become the BDR.",
- "q164-2": "Router R4 will become the DR and router R3 will become the\n BDR.",
- "q164-3": "Router R1 will become the DR and router R2 will become the BDR."
- },
- "correct": "q164-2"
- },
- {
- "id": "UxfVw4NHQ",
- "title": "165. Refer to the exhibit. The Branch Router has an OSPF neighbor relationship with the HQ router over the\n 198.51.0.4/30 network. The 198.51.0.8/30 network link should serve as a backup when the OSPF link goes down. The\n floating static route command ip route 0.0.0.0 0.0.0.0 S0/1/1 100 was issued on Branch and now traffic is using\n the backup link even when the OSPF link is up and functioning. Which change should be made to the static route\n command so that traffic will only use the OSPF link when it is up?",
- "images": [],
- "type": 0,
- "options": {
- "q165-0": "Add the next hop neighbor address of 198.51.0.8.",
- "q165-1": "Change the administrative distance to 1.",
- "q165-2": "Change the destination network to 198.51.0.5.",
- "q165-3": "Change the administrative distance to 120."
- },
- "correct": "q165-3"
- },
- {
- "id": "em6FgaIwg",
- "title": "166. Refer to the exhibit. An attacker on PC X sends a frame with two 802.1Q tags on it, one for VLAN 40 and\n another for VLAN 12. What will happen to this frame?",
- "images": [],
- "type": 0,
- "options": {
- "q166-0": "SW-A will drop the frame because it is invalid.",
- "q166-1": "SW-A will leave both tags on the frame and send it to SW-B, which will forward it to hosts on VLAN 40.",
- "q166-2": "SW-A will remove both tags and forward the rest of the frame across the\n trunk link, where SW-B will forward the frame to hosts on VLAN 40.",
- "q166-3": "SW-A will remove the outer tag and send the rest of the frame across the trunk link, where SW-B will forward the\n frame to hosts on VLAN 12."
- },
- "correct": "q166-2"
- },
- {
- "id": "gVtN-eAjk",
- "title": "167. A new network policy requires an ACL to deny HTTP access from all guests to a web server at the main\n office. All guests use addressing from the IPv6 subnet 2001:DB8:19:C::/64. The web server is configured with the\n address 2001:DB8:19:A::105/64. Implementing the NoWeb ACL on the interface for the guest LAN requires which three\n commands? (Choose three.)",
- "images": [],
- "type": 1,
- "options": {
- "q167-0": "permit tcp any host 2001:DB8:19:A::105 eq 80",
- "q167-1": "deny tcp host 2001:DB8:19:A::105 any eq 80",
- "q167-2": "deny tcp any host 2001:DB8:19:A::105 eq 80",
- "q167-3": "permit ipv6 any any",
- "q167-4": "deny ipv6 any any",
- "q167-5": "ipv6 traffic-filter NoWeb in",
- "q167-6": "ip access-group NoWeb in"
- },
- "correct": [
- "q167-2",
- "q167-3",
- "q167-5"
- ]
- },
- {
- "id": "miOKIS_mL",
- "title": "168. An OSPF router has three directly connected networks; 172.16.0.0/16, 172.16.1.0/16, and 172.16.2.0/16.\n Which OSPF network command would advertise only the 172.16.1.0 network to neighbors?",
- "images": [],
- "type": 0,
- "options": {
- "q168-0": "router(config-router)# network 172.16.1.0 0.0.255.255 area\n 0",
- "q168-1": "router(config-router)# network 172.16.0.0 0.0.15.255 area 0",
- "q168-2": "router(config-router)# network 172.16.1.0 255.255.255.0 area 0",
- "q168-3": "router(config-router)# network 172.16.1.0 0.0.0.0 area 0"
- },
- "correct": "q168-0"
- },
- {
- "id": "XUYZs7uqT",
- "title": "169. Which subnet mask would be used as the classful mask for the IP address 192.135.250.27?",
- "images": [],
- "type": 0,
- "options": {
- "q169-0": "255.0.0.0",
- "q169-1": "255.255.0.0",
- "q169-2": "255.255.255.0",
- "q169-3": "255.255.255.224"
- },
- "correct": "q169-2"
- },
- {
- "id": "1_BXNmaA9",
- "title": "170. Refer to the exhibit. A small business uses VLANs 8, 20, 25, and 30 on two switches that have a trunk\n link between them. What native VLAN should be used on the trunk if Cisco best practices are being\n implemented?",
- "images": [
- "https://itexamanswers.net/wp-content/uploads/2017/02/ccna1chap3-newquestion2.png"
- ],
- "type": 0,
- "options": {
- "q170-0": "5",
- "q170-1": "8",
- "q170-2": "20",
- "q170-3": "25",
- "q170-4": "30"
- },
- "correct": "q170-0"
- },
- {
- "id": "uzspsJf1Q",
- "title": "171. The buffers for packet processing and the running configuration file are temporarily stored in which\n type of router memory?",
- "images": [],
- "type": 0,
- "options": {
- "q171-0": "Flash",
- "q171-1": "NVRAM",
- "q171-2": "RAM",
- "q171-3": "ROM"
- },
- "correct": "q171-2"
- },
- {
- "id": "0JoqKR8Lh",
- "title": "172. A standard ACL has been configured on a router to allow only clients from the 10.11.110.0/24 network to\n telnet or to ssh to the VTY lines of the router. Which command will correctly apply this ACL?",
- "images": [],
- "type": 0,
- "options": {
- "q172-0": "access-group 11 in",
- "q172-1": "access-class 11 in",
- "q172-2": "access-list 11 in",
- "q172-3": "access-list 110 in"
- },
- "correct": "q172-1"
- },
- {
- "id": "L5Hb655Sz",
- "title": "173. Refer to the exhibit.What address will summarize the LANs attached to routers 2-A and 3-A and can be\n configured in a summary static route to advertise them to an upstream neighbor?",
- "images": [],
- "type": 0,
- "options": {
- "q173-0": "10.0.0.0/24",
- "q173-1": "10.0.0.0/23",
- "q173-2": "10.0.0.0/22",
- "q173-3": "10.0.0.0/21"
- },
- "correct": "q173-3"
- },
- {
- "id": "ml9fWco_R",
- "title": "174. A security specialist designs an ACL to deny access to a web server from all sales staff. The sales\n staff are assigned addressing from the IPv6 subnet 2001:db8:48:2c::/64. The web server is assigned the address\n 2001:db8:48:1c::50/64. Configuring the WebFilter ACL on the LAN interface for the sales staff will require which\n three commands? (Choose three.)",
- "images": [],
- "type": 1,
- "options": {
- "q174-0": "permit tcp any host 2001:db8:48:1c::50 eq 80",
- "q174-1": "deny tcp host 2001:db8:48:1c::50 any eq 80",
- "q174-2": "deny tcp any host 2001:db8:48:1c::50 eq 80",
- "q174-3": "permit ipv6 any any",
- "q174-4": "deny ipv6 any any",
- "q174-5": "ip access-group WebFilter in",
- "q174-6": "ipv6 traffic-filter WebFilter in"
- },
- "correct": [
- "q174-1",
- "q174-2",
- "q174-4"
- ]
- },
- {
- "id": "t84nug7xr",
- "title": "175. To enable RIP routing for a specific subnet, the configuration command network 192.168.5.64 was entered\n by the network administrator. What address, if any, appears in the running configuration file to identify this\n network?",
- "images": [],
- "type": 0,
- "options": {
- "q175-0": "192.168.5.64",
- "q175-1": "192.168.5.0",
- "q175-2": "192.168.0.0",
- "q175-3": "No address is displayed."
- },
- "correct": "q175-1"
- },
- {
- "id": "L3Sy1fgDt",
- "title": "176. Refer to the exhibit. An ACL preventing FTP and HTTP access to the interval web server from all teaching\n assistants has been implemented in the Board Office. The address of the web server is 172.20.1.100 and all\n teaching assistants are assigned addresses in the 172.21.1.0/24 network. After implement the ACL, access to all\n servers is denied. What is the problem?",
- "images": [],
- "type": 0,
- "options": {
- "q176-0": "inbound ACLs must be routed before they are processed",
- "q176-1": "the ACL is implicitly denying access to all the servers",
- "q176-2": "named ACLs requite the use of port numbers",
- "q176-3": "the ACL is applied to the interface using the wrong direction"
- },
- "correct": "q176-2"
- },
- {
- "id": "7p233vELt",
- "title": "177. A router learns of multiple toward the same destination. Which value in a routing table represents the\n trustworthiness of learned routes and is used by the router to determine which route to install into the routing\n table for specific situation?",
- "images": [],
- "type": 0,
- "options": {
- "q177-0": "Metric",
- "q177-1": "Colour",
- "q177-2": "Meter",
- "q177-3": "Bread"
- },
- "correct": "q177-0"
- },
- {
- "id": "_b-x9q38c",
- "title": "178. What is the minimum configuration for a router interface that is participating in IPv6 routing?
\n",
- "images": [],
- "type": 0,
- "options": {
- "q178-0": "Ipv6",
- "q178-1": "OSPF",
- "q178-2": "Link-access",
- "q178-3": "To have only a link-local IPv6 address",
- "q178-4": "Protocol"
- },
- "correct": "q178-3"
- },
- {
- "id": "zFDINYCEW",
- "title": "179. Which two statements are true about half-duplex and full-duplex communications? (Choose two.)
\n",
- "images": [],
- "type": 1,
- "options": {
- "q179-0": "Full duplex offers 100 percent potential use of the\n bandwidth.",
- "q179-1": "Half duplex has only one channel.",
- "q179-2": "All modern NICs support both half-duplex and full-duplex communication.",
- "q179-3": "Full duplex allows both ends to transmit and receive\n simultaneously.",
- "q179-4": "Full duplex increases the effective bandwidth."
- },
- "correct": [
- "q179-0",
- "q179-3"
- ]
- },
- {
- "id": "6yRTgWNrC",
- "title": "181. Which two commands should be implemented to return a Cisco 3560 trunk port to its default configuration?\n (Choose two.)",
- "images": [],
- "type": 1,
- "options": {
- "q181-0": "S1(config-if)# no switchport trunk allowed vlan",
- "q181-1": "S1(config-if)# no switchport trunk native vlan",
- "q181-2": "S1(config-if)# switchport mode dynamic desirable",
- "q181-3": "S1(config-if)# switchport mode access",
- "q181-4": "S1(config-if)# switchport access vlan 1"
- },
- "correct": [
- "q181-0",
- "q181-1"
- ]
- },
- {
- "id": "CR_6GGL12",
- "title": "182. Which command will enable auto-MDIX on a device?",
- "images": [],
- "type": 0,
- "options": {
- "q182-0": "S1(config-if)# mdix auto",
- "q182-1": "S1# auto-mdix S1(config-if)# auto-mdix",
- "q182-2": "S1# mdix auto S1(config)# mdix auto",
- "q182-3": "S1(config)# auto-mdix"
- },
- "correct": "q182-0"
- },
- {
- "id": "4OZ1xcm_f",
- "title": "183. What is the effect of issuing the passive-interface default command on a router that is configured for\n OSPF?",
- "images": [],
- "type": 0,
- "options": {
- "q183-0": "Routers that share a link and use the same routing protocol",
- "q183-1": "It prevents OSPF messages from being sent out any OSPF-enabled\n interface.",
- "q183-2": "All of above",
- "q183-3": "Routers that share a link and use the same routing protocol"
- },
- "correct": "q183-1"
- },
- {
- "id": "niIr4r0ug",
- "title": "184. A network administrator is implementing a distance vector routing protocol between neighbors on the\n network. In the context of distance vector protocols, what is a neighbor?",
- "images": [],
- "type": 0,
- "options": {
- "q184-0": "routers that are reachable over a TCP session",
- "q184-1": "routers that share a link and use the same routing\n protocol",
- "q184-2": "routers that reside in the same area",
- "q184-3": "routers that exchange LSAs"
- },
- "correct": "q184-1"
- },
- {
- "id": "Ov8O028I5",
- "title": "185. Refer to the exhibit. A network administrator has just configured address translation and is verifying\n the configuration. What three things can the administrator verify? (Choose three.)",
- "images": [
- "https://itexamanswers.net/wp-content/uploads/2017/02/new-ccna-2-practice-exam-p53.png"
- ],
- "type": 1,
- "options": {
- "q185-0": "Address translation is working.",
- "q185-1": "Three addresses from the NAT pool are being used by hosts.",
- "q185-2": "The name of the NAT pool is refCount.",
- "q185-3": "A standard access list numbered 1 was used as part of the configuration\n process.",
- "q185-4": "Two types of NAT are enabled.",
- "q185-5": "One port on the router is not participating in the address translation."
- },
- "correct": [
- "q185-0",
- "q185-3",
- "q185-4"
- ]
- },
- {
- "id": "o5YRadWX7",
- "title": "186. Which two methods can be used to provide secure management access to a Cisco switch? (Choose\n two.)",
- "images": [],
- "type": 1,
- "options": {
- "q186-0": "Configure all switch ports to a new VLAN that is not VLAN 1.",
- "q186-1": "Configure specific ports for management traffic on a specific\n VLAN.",
- "q186-2": "Configure SSH for remote management.",
- "q186-3": "Configure all unused ports to a “black hole.”",
- "q186-4": "Configure the native VLAN to match the default VLAN."
- },
- "correct": [
- "q186-1",
- "q186-2"
- ]
- },
- {
- "id": "ZBEwnGgt2",
- "title": "187. A router learns of multiple routes toward the same destination. Which value in a routing table\n represents the trustworthiness of learned routes and is used by the router to determine which route to install\n into the routing table for this specific situation?",
- "images": [],
- "type": 0,
- "options": {
- "q187-0": "routing protocol",
- "q187-1": "outgoing interface",
- "q187-2": "metric",
- "q187-3": "administrative distance"
- },
- "correct": "q187-3"
- },
- {
- "id": "5VNyjjRVT",
- "title": "188. Which value in a routing table represents trustworthiness and is used by the router to determine which\n route to install into the routing table when there are multiple routes toward the same destination?",
- "images": [],
- "type": 0,
- "options": {
- "q188-0": "administrative distance",
- "q188-1": "metric",
- "q188-2": "outgoing interface",
- "q188-3": "routing protocol"
- },
- "correct": "q188-0"
- },
- {
- "id": "zk-Q_59Sa",
- "title": "189. The network address 172.18.9.128 with netmask 255.255.255.128 is matched by which wildcard\n mask?",
- "images": [],
- "type": 0,
- "options": {
- "q189-0": "0.0.0.31",
- "q189-1": "0.0.0.255",
- "q189-2": "0.0.0.127",
- "q189-3": "0.0.0.63"
- },
- "correct": "q189-2"
- },
- {
- "id": "ACGR9kBU-",
- "title": "190. Which three addresses could be used as the destination address for OSPFv3 messages? (Choose\n three.)",
- "images": [],
- "type": 1,
- "options": {
- "q190-0": "FF02::5",
- "q190-1": "FF02::6",
- "q190-2": "FF02::A",
- "q190-3": "2001:db8:cafe::1",
- "q190-4": "FF02::1:2",
- "q190-5": "FE80::1"
- },
- "correct": [
- "q190-0",
- "q190-1",
- "q190-5"
- ]
- },
- {
- "id": "FYl_42ejK",
- "title": "193. What are two reasons that will prevent two routers from forming an OSPFv2 adjacency? (Choose\n two.)",
- "images": [],
- "type": 1,
- "options": {
- "q193-0": "mismatched subnet masks on the link interfaces",
- "q193-1": "a mismatched Cisco IOS version that is",
- "q193-2": "used use of private IP addresses on the link interfaces",
- "q193-3": "one router connecting to a FastEthernet port on the switch and the other connecting to a GigabitEthernet port",
- "q193-4": "mismatched OSPF Hello or Dead timers"
- },
- "correct": [
- "q193-0",
- "q193-4"
- ]
- },
- {
- "id": "n8Oez0xom",
- "title": "195. Refer to the exhibit. An ACL preventing FTP and HTTP access to the internal web server from all teaching\n assistants has been implemented in the Board office. The address of the web server is 172.20.1.100 and all\n teaching assistants are assigned addresses in the 172.21.1.0/24 network. After implementing the ACL, access to all\n servers is denied. What is the problem?",
- "images": [],
- "type": 0,
- "options": {
- "q195-0": "Inbound ACLs must be routed before they are processed.",
- "q195-1": "The ACL is implicitly denying access to all the servers.",
- "q195-2": "Named ACLs require the use of port numbers.",
- "q195-3": "The ACL is applied to the interface using the wrong direction."
- },
- "correct": "q195-1"
- },
- {
- "id": "nXPR_NaKN",
- "title": "196. Refer to the exhibit. A new network policy requires an ACL denying FTP and Telnet access to a Corp file\n server from all interns. The address of the file server is 172.16.1.15 and all interns are assigned addresses in\n the 172.18.200.0/24 network. After implementing the ACL, no one in the Corp network can access any of the servers.\n What is the problem?",
- "images": [],
- "type": 1,
- "options": {
- "q196-0": "Inbound ACLs must be routed before they are processed.",
- "q196-1": "The ACL is implicitly denying access to all the servers.",
- "q196-2": "Named ACLs require the use of port numbers.",
- "q196-3": "The ACL is applied to the interface using the wrong direction."
- },
- "correct": [
- "q196-0",
- "q196-1"
- ]
- },
- {
- "id": "HNxsVX32v",
- "title": "198. Refer to the exhibit. Based on the exhibited configuration and output, why is VLAN 99\n missing?
",
- "images": [
- "https://itexamanswers.net/wp-content/uploads/2017/06/48-1.jpg"
- ],
- "type": 0,
- "options": {
- "q198-0": "because there is a cabling problem on VLAN 99",
- "q198-1": "because VLAN 99 is not a valid management VLAN",
- "q198-2": "because VLAN 1 is up and there can only be one management VLAN on the switch",
- "q198-3": "because VLAN 99 has not yet been created"
- },
- "correct": "q198-3"
}
]
}
\ No newline at end of file